lkml.org 
[lkml]   [2015]   [Jul]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 4/5] clk: mediatek: Add USB clock support in MT8173 APMIXEDSYS
On Tue, Jul 14, 2015 at 5:46 PM, James Liao <jamesjj.liao@mediatek.com> wrote:
> Hi Daniel,
>
> On Tue, 2015-07-14 at 11:23 +0800, Daniel Kurtz wrote:
>> On Tue, Jul 14, 2015 at 10:45 AM, James Liao <jamesjj.liao@mediatek.com> wrote:
>> > On Mon, 2015-07-13 at 22:46 +0800, Daniel Kurtz wrote:
>> >> > +static const struct clk_ops mtk_ref2usb_tx_ops = {
>> >> > + .is_prepared = mtk_ref2usb_tx_is_prepared,
>> >> > + .prepare = mtk_ref2usb_tx_prepare,
>> >> > + .unprepare = mtk_ref2usb_tx_unprepare,
>> >> > +};
>> >>
>> >> Burying the implementation of this special "mtk_ref2usb" clock in
>> >> clk-mt8173,c seems a bit awkward.
>> >> Can you please move it to its own file, like mediatek/clk-usb.c?
>> >
>> > Do you mean clk/mediatek/clk-usb.c?
>> >
>> > This clock is a MT8173 specific clock, which may not be reused by other
>> > SoCs. So I think it's not necessary to move it to a separated file.
>>
>> Yes, this is a wrapper for a type of clock. I think it would be
>> better in its own file, rather than embedded in clk-mt8173.c, which is
>> more about enumerating and initializing the clock tree.
>>
>> Perhaps today it is only used for mt8173, but that may not be the case
>> in the future.
>
> OK, I'll separate it from clk-mt8173.c.
>
> Ref2usb_tx's control register is located in APMIXEDSYS, which contains
> most of PLL controlling. Is this clock suitable to implemented
> mtk-pll.c? Or it's proper to be a separated file such as clk-usb.c?

I think a separate clk-usb.c might be better since the driver is very
different than what is used for the PLLs.

Thanks!
-Dan

> Best regards,
>
> James
>
>


\
 
 \ /
  Last update: 2015-07-14 12:41    [W:0.037 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site