lkml.org 
[lkml]   [2015]   [Jun]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 1/2] ASoC: qcom: document apq8016 sbc machine driver bindings


On 09/06/15 18:13, Mark Brown wrote:
> On Tue, Jun 09, 2015 at 06:08:24PM +0100, Srinivas Kandagatla wrote:
>
>>>>> +- external : flag to indicate if the I2S is connected to external codec
>
>>> not sure I understand why we need a boolean property indicating if an
>>> external CODEC is in use - what is the consequence of setting this
>>> property?
>
>> As of today, the consequence of setting this flag is to setup correct
>> dai_link names.
>> Also there are some limitations on which MI2S can be configured to external
>> or internal codecs, this flag can be used in future to validate such
>> configurations, if required.
>
> That validation sounds like something that the SoC drivers should be
> doing if required rather than the machine driver - otherwise every
> machine driver using this SoC would have to implement the same
> validation.

Thats a valid point, for now I can move to using dai link name property
instead of external flag, this should work for now. I will add the
validation logic in SOC driver if required in future.
>


\
 
 \ /
  Last update: 2015-06-09 20:01    [W:0.059 / U:1.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site