lkml.org 
[lkml]   [2015]   [Jun]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/7] dt/bindings: Add binding for the Raspberry Pi clock provider
If I were the Clock Maintainer, I would have probably missed this
patch. You _must_ intimate which subsystem you are submitting to.

> The hardware clocks are not controllable by the ARM, so we have to
> make requests to the firmware to do so from the VPU side. This will
> let us replace fixed clocks in our DT with actual clock control (and
> correct frequency information).
>
> v2: Include the dt-bindings header in this commit instead of the next
> one. Make the clock indices match the firmware clock IDs. Rename
> the binding's compat string. Move the firmware phandle to be
> under a vendor-specific namespace.
>
> Signed-off-by: Eric Anholt <eric@anholt.net>
> ---
> .../clock/raspberrypi,bcm2835-firmware-clocks.txt | 25 ++++++++++++++++++++++
> include/dt-bindings/clk/raspberrypi.h | 23 ++++++++++++++++++++
> 2 files changed, 48 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/raspberrypi,bcm2835-firmware-clocks.txt
> create mode 100644 include/dt-bindings/clk/raspberrypi.h
>
> diff --git a/Documentation/devicetree/bindings/clock/raspberrypi,bcm2835-firmware-clocks.txt b/Documentation/devicetree/bindings/clock/raspberrypi,bcm2835-firmware-clocks.txt
> new file mode 100644
> index 0000000..0972602
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/raspberrypi,bcm2835-firmware-clocks.txt
> @@ -0,0 +1,25 @@
> +Raspberry Pi firmware clock provider.
> +
> +The Raspberry Pi architecture doesn't provide direct access to the
> +CLOCKMAN peripheral from the ARM side, so Linux has to make requests
> +to the VPU firmware to program them.
> +
> +This binding uses the common clock binding:
> +Documentation/devicetree/bindings/clock/clock-bindings.txt
> +
> +Required properties:
> +- compatible: Should be "raspberrypi,bcm2835-firmware-clocks"
> +
> +- #clock-cells: Shall have value <1>. The permitted clock-specifier
> + values can be found in
> + include/dt-bindings/clk/raspberrypi.h.
> +
> +- raspberrypi,firmware: Phandle to the firmware driver node.

I think 'firmware' is a candidate for a generic phandle name.

Apart from that, binding looks pretty inert:

Acked-by: Lee Jones <lee@kernel.org>

> +Example:
> +
> +firmware_clocks: firmware-clocks {
> + compatible = "raspberrypi,bcm2835-firmware-clocks";
> + #clock-cells = <1>;
> + raspberrypi,firmware = <&firmware>;
> +};
> diff --git a/include/dt-bindings/clk/raspberrypi.h b/include/dt-bindings/clk/raspberrypi.h
> new file mode 100644
> index 0000000..ceec90f
> --- /dev/null
> +++ b/include/dt-bindings/clk/raspberrypi.h
> @@ -0,0 +1,23 @@
> +#/*
> + * Copyright © 2015 Broadcom
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#ifndef _DT_BINDINGS_CLK_RASPBERRYPI_H
> +#define _DT_BINDINGS_CLK_RASPBERRYPI_H
> +
> +#define RPI_CLOCK_EMMC 1
> +#define RPI_CLOCK_UART0 2
> +#define RPI_CLOCK_ARM 3
> +#define RPI_CLOCK_CORE 4
> +#define RPI_CLOCK_V3D 5
> +#define RPI_CLOCK_H264 6
> +#define RPI_CLOCK_ISP 7
> +#define RPI_CLOCK_SDRAM 8
> +#define RPI_CLOCK_PIXEL 9
> +#define RPI_CLOCK_PWM 10
> +
> +#endif


\
 
 \ /
  Last update: 2015-06-09 12:21    [W:0.122 / U:0.428 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site