lkml.org 
[lkml]   [2015]   [Jun]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 1/3] ARM: rockchip: fix the CPU soft reset


在 2015年06月09日 05:54, Caesar Wang 写道:
>
>
> 在 2015年06月08日 17:24, Russell King - ARM Linux 写道:
>> On Mon, Jun 08, 2015 at 03:11:34PM +0800, Caesar Wang wrote:
>>> We need different orderings when turning a core on and turning a core
>>> off. In one case we need to assert reset before turning power off.
>>> In ther other case we need to turn power on and the deassert reset.
>>>
>>> In general, the correct flow is:
>>>
>>> CPU off:
>>> reset_control_assert
>>> regmap_update_bits(pmu, PMU_PWRDN_CON, BIT(pd), BIT(pd))
>>> wait_for_power_domain_to_turn_off
>>> CPU on:
>>> regmap_update_bits(pmu, PMU_PWRDN_CON, BIT(pd), 0)
>>> wait_for_power_domain_to_turn_on
>>> reset_control_deassert
>>>
>>> This is needed for stressing CPU up/down, as per:
>>> cd /sys/devices/system/cpu/
>>> for i in $(seq 10000); do
>>> echo "================= $i ============"
>>> for j in $(seq 100); do
>>> while [[ "$(cat cpu1/online)$(cat cpu2/online)$(cat
>>> cpu3/online)" != "000"" ]]
>>> echo 0 > cpu1/online
>>> echo 0 > cpu2/online
>>> echo 0 > cpu3/online
>>> done
>>> while [[ "$(cat cpu1/online)$(cat cpu2/online)$(cat
>>> cpu3/online)" != "111" ]]; do
>>> echo 1 > cpu1/online
>>> echo 1 > cpu2/online
>>> echo 1 > cpu3/online
>>> done
>>> done
>>> done
>>>
>>> The following is reproducile log:
>> "reproducable"
>>
>>> [34466.186812] PM: noirq suspend of devices complete after
>>> 0.669 msecs
>>> [34466.186824] Disabling non-boot CPUs ...
>>> [34466.187509] CPU1: shutdown
>>> [34466.188672] CPU2: shutdown
>>> [34473.736627] Kernel panic - not syncing:Watchdog detected
>>> hard LOCKUP on cpu 0
>>> .......
>>> or others similar log:
>>> .......
>>> [ 4072.454453] CPU1: shutdown
>>> [ 4072.504436] CPU2: shutdown
>>> [ 4072.554426] CPU3: shutdown
>>> [ 4072.577827] CPU1: Booted secondary processor
>>> [ 4072.582611] CPU2: Booted secondary processor
>>> [ 4072.587426] CPU3: Booted secondary processor
>>> <hang>
>>>
>>> Signed-off-by: Caesar Wang <wxt@rock-chips.com>
>>> Reviewed-by: Doug Anderson <dianders@chromium.org>
>>>
>>> Changes in v5:
>>> - back to v2 cpu on/off flow, As Heiko point out in patch v3.
>>> - delay more time in rockchip_boot_secondary().
>>> From CPU up/down tests, Needed more time to complete CPU process.
>>> In order to ensure a more, Here that be delayed 1ms.
>>>
>>> Changes in v4:
>>> - Add reset_control_put(rstc) for the non-error case.
>>>
>>> Changes in v3:
>>> - FIx the PATCH v2, it doesn't work on chromium 3.14.
>>>
>>> Changes in v2:
>>> - As Heiko suggestion, re-adjust the cpu on/off flow.
>>> CPU off:
>>> reset_control_assert
>>> regmap_update_bits(pmu, PMU_PWRDN_CON, BIT(pd), BIT(pd))
>>> wait_for_power_domain_to_turn_off
>>> CPU on:
>>> regmap_update_bits(pmu, PMU_PWRDN_CON, BIT(pd), 0)
>>> wait_for_power_domain_to_turn_on
>>> reset_control_deassert
>>>
>>> ---
>>>
>>> arch/arm/mach-rockchip/platsmp.c | 18 ++++++++++--------
>>> 1 file changed, 10 insertions(+), 8 deletions(-)
>>>
>>> diff --git a/arch/arm/mach-rockchip/platsmp.c
>>> b/arch/arm/mach-rockchip/platsmp.c
>>> index 5b4ca3c..bd40852 100644
>>> --- a/arch/arm/mach-rockchip/platsmp.c
>>> +++ b/arch/arm/mach-rockchip/platsmp.c
>>> @@ -72,6 +72,7 @@ static struct reset_control
>>> *rockchip_get_core_reset(int cpu)
>>> static int pmu_set_power_domain(int pd, bool on)
>>> {
>>> u32 val = (on) ? 0 : BIT(pd);
>>> + struct reset_control *rstc = rockchip_get_core_reset(pd);
>>> int ret;
>>> /*
>>> @@ -80,20 +81,15 @@ static int pmu_set_power_domain(int pd, bool on)
>>> * processor is powered down.
>>> */
>>> if (read_cpuid_part() != ARM_CPU_PART_CORTEX_A9) {
>>> - struct reset_control *rstc = rockchip_get_core_reset(pd);
>>> -
>>> + /* We only require the reset on the RK3288 at the moment */
>>> if (IS_ERR(rstc)) {
>>> pr_err("%s: could not get reset control for core %d\n",
>>> __func__, pd);
>>> return PTR_ERR(rstc);
>>> }
>>> - if (on)
>>> - reset_control_deassert(rstc);
>>> - else
>>> + if (!on)
>>> reset_control_assert(rstc);
>>> -
>>> - reset_control_put(rstc);
>>> }
>>> ret = regmap_update_bits(pmu, PMU_PWRDN_CON, BIT(pd), val);
>>> @@ -112,6 +108,12 @@ static int pmu_set_power_domain(int pd, bool on)
>>> }
>>> }
>>> + if (read_cpuid_part() != ARM_CPU_PART_CORTEX_A9 && on)
>>> + reset_control_deassert(rstc);
>>> +
>>> + if (!IS_ERR(rstc))
>>> + reset_control_put(rstc);
>>> +
>>> return 0;
>>> }
>>> @@ -148,7 +150,7 @@ static int __cpuinit
>>> rockchip_boot_secondary(unsigned int cpu,
>>> * sram_base_addr + 4: 0xdeadbeaf
>>> * sram_base_addr + 8: start address for pc
>>> * */
>>> - udelay(10);
>>> + mdelay(1);
>> The reason for this delay needs a comment, as it's not obvious why you
>> would need to delay before writing to the SRAM. Also documenting in
>> a comment why the delay is necessary would be good.
>>
>
> Sorry for delay, I wait a better solution for this.
> We don't need any 10us delay or 1m delay, I think.
>
> - udelay(10);
>
> + while (readl(sram_base_addr + 4 ) != 1); //lock =1
>
>
> We need do that if i'm correct from the bootrom code.
> Tested are pass over 120000 cycles on today, I will wait more testing
> cycles to confirm that's ok.
>

Please forget it!

It's helpful that be caused by adding a log.:-(

>
>

--
Thanks,
- Caesar




\
 
 \ /
  Last update: 2015-06-09 12:21    [W:0.069 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site