lkml.org 
[lkml]   [2015]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: NILFS2: double uuid
On 08.06.2015, Heinz Diehl wrote: 

To be more precise, here's what works and what don't, in detail
(and after a fresh install of Arch):

The USB memory is xfs formatted and works fine:

[root@alarmpi /]# lsblk -f
NAME FSTYPE LABEL UUID MOUNTPOINT
sda
`-sda1 xfs ff17dda9-fcae-42e7-a438-9087de58902e
mmcblk0
|-mmcblk0p1 vfat EA5B-4477 /boot
`-mmcblk0p2 ext4 c4ddc925-15ab-4465-ac78-967a845e98d5 /


Now, it's nilfs2 formatted:

[root@alarmpi /]# mkfs.nilfs2 /dev/sda1
WARNING: Device /dev/sda1 appears to contain an existing xfs superblock.
WARNING: All data will be lost after format!

DO YOU REALLY WANT TO FORMAT DEVICE /dev/sda1?

Continue? [y/N] y
mkfs.nilfs2 (nilfs-utils 2.2.3)
Start writing file system initial data to the device
Blocksize:4096 Device:/dev/sda1 Device Size:32026656768
File system initialization succeeded !!

After that, all seems to be ok. lsblk shown no double uuid:

[root@alarmpi /]# lsblk -f
NAME FSTYPE LABEL UUID MOUNTPOINT
sda
`-sda1 nilfs2 98da384c-392e-4551-98c0-d076524f5d8b
mmcblk0
|-mmcblk0p1 vfat EA5B-4477 /boot
`-mmcblk0p2 ext4 c4ddc925-15ab-4465-ac78-967a845e98d5 /
[root@alarmpi /]#


Now the USB drive gets manually mounted, all is ok:

[root@alarmpi /]# mount /dev/sda1 /USBDRIVE
[root@alarmpi /]# lsblk -f
NAME FSTYPE LABEL UUID MOUNTPOINT
sda
`-sda1 nilfs2 98da384c-392e-4551-98c0-d076524f5d8b /USBDRIVE
mmcblk0
|-mmcblk0p1 vfat EA5B-4477 /boot
`-mmcblk0p2 ext4 c4ddc925-15ab-4465-ac78-967a845e98d5 /


Now, the newly formatted drive is registered in fstab to be
automatically mounted on boot:

UUID=ff17dda9-fcae-42e7-a438-9087de58902e /USBDRIVE nilfs2 defaults 0 0

After rebooting the machine, nothing is mounted, and lsblk shows the
double uuid:

[root@alarmpi /]# lsblk -f
NAME FSTYPE LABEL UUID MOUNTPOINT
sda 98da384c-392e-4551-98c0-d076524f5d8b
`-sda1 nilfs2 98da384c-392e-4551-98c0-d076524f5d8b
mmcblk0
|-mmcblk0p1 vfat EA5B-4477 /boot
`-mmcblk0p2 ext4 c4ddc925-15ab-4465-ac78-967a845e98d5 /

The logs say:

Jun 08 11:23:47 alarmpi mount: mount.nilfs2: Error while mounting /dev/sda on /USBDRIVE: Device or resource busy
Jun 08 11:23:47 alarmpi systemd: Failed to mount /USBDRIVE.

Here it becomes clear what happens: the system wants to mount /dev/sda
rather than /dev/sda1, and thus fails.

Out of curiosity, I tried both xfs, ext4 and btrfs, and all of them
just work.

Thanks,
Heinz.


\
 
 \ /
  Last update: 2015-06-08 12:21    [W:0.117 / U:0.416 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site