[lkml]   [2015]   [Jun]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH 07/11] staging: rtl8192e: Remove dead code: dig_t::dbg_mode
On 04.06.2015 08:06, Sudip Mukherjee wrote:
> On Thu, Jun 04, 2015 at 07:50:07AM +0200, Mateusz Kulikowski wrote:
>> On 04.06.2015 07:18, Sudip Mukherjee wrote:
>>> On Wed, Jun 03, 2015 at 08:21:02PM +0200, Mateusz Kulikowski wrote:
>>>> On 03.06.2015 09:26, Sudip Mukherjee wrote:
>>>>> On Tue, Jun 02, 2015 at 10:48:11PM +0200, Mateusz Kulikowski wrote:
>>>> No, I missed that - this one should also be removed - probably because of similar naming (DbgMode, dbg_mode).
>>>> Thanks for finding it - I'll fix that in v2.
>>>> Apart from that - did you had time/courage to analyze rest of the patches (so I can send v2)?
>>> at a first glance looked ok to me. I hope you have checked it on the
>>> hardware as well. but maybe Dan can find something.
>>> better send v2.
>> Of course I have checked it, although - as I wrote in past - this driver has not very good performance.
> is there any other driver which has better performance on this hardware
> than this driver? and how are you measuring the performance?

What I meant is that this driver (at least on my HW/SW configuration) is not very reliable.

It drops a lot of packages and transmission speed is far from declared.
But - as far as I checked - it's not due to my changes (I checked that some time ago).

Perhaps my hardware has some issues - I have to buy another rtl8192e card and/or test on Windows
to be sure (will do both steps probably).

As for measurement, I have simple tests on my home network (WPA2/CCMP):
- Scan available networks
- Download 1MB file, check md5
- Ping router/gateway


 \ /
  Last update: 2015-06-07 21:41    [W:0.055 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site