lkml.org 
[lkml]   [2015]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] EDAC, altera: wrap edac pm with a CONFIG_PM
On Fri, Jun 05, 2015 at 04:40:29PM -0500, Thor Thayer wrote:
> Yes, in our case, it is a hardware issue but I'm still gathering
> information.
>
> The IRQ vectors for OCRAM reside on DDR and in Suspend-to-RAM mode we're
> executing out of OCRAM. If an ECC error occurs, we can't handle it so it was
> decided to make them mutually exclusive.

Thanks Thor,

that's actually a good-enough explanation for me - I was just making
sure that it is not some silly EDAC core limitation preventing you guys
from doing suspend.

Anyway, I've committed the version below, if you still feel you want to
improve the explanation, no problem - it is the topmost patch on the
branch and I can amend it easily.

---
From: Alan Tull <atull@opensource.altera.com>
Date: Fri, 5 Jun 2015 08:49:15 -0500
Subject: [PATCH] EDAC, altera: Do not allow suspend when EDAC is enabled

Suspend-to-RAM and EDAC support are mutually exclusive on SOCFPGA. If
EDAC is enabled, it will prevent the platform from going into suspend.

The reason is that the IRQ vectors for OCRAM reside on DDR and in
Suspend-to-RAM mode we're executing out of OCRAM. If an ECC error
occurs, we can't handle it so it was decided to make them mutually
exclusive.

Signed-off-by: Alan Tull <atull@opensource.altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: dinh.linux@gmail.com
Cc: dougthompson@xmission.com
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: mchehab@osg.samsung.com
Cc: tthayer@opensource.altera.com
Link: http://lkml.kernel.org/r/1433512155-9906-1-git-send-email-dinguyen@opensource.altera.com
Signed-off-by: Borislav Petkov <bp@suse.de>
---
drivers/edac/altera_edac.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)

diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index 182c741adf3e..23ef0917483c 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -477,11 +477,31 @@ static int altr_sdram_remove(struct platform_device *pdev)
return 0;
}

+/*
+ * If you want to suspend, need to disable EDAC by removing it
+ * from the device tree or defconfig.
+ */
+#ifdef CONFIG_PM
+static int altr_sdram_prepare(struct device *dev)
+{
+ pr_err("Suspend not allowed when EDAC is enabled.\n");
+
+ return -EPERM;
+}
+
+static const struct dev_pm_ops altr_sdram_pm_ops = {
+ .prepare = altr_sdram_prepare,
+};
+#endif
+
static struct platform_driver altr_sdram_edac_driver = {
.probe = altr_sdram_probe,
.remove = altr_sdram_remove,
.driver = {
.name = "altr_sdram_edac",
+#ifdef CONFIG_PM
+ .pm = &altr_sdram_pm_ops,
+#endif
.of_match_table = altr_sdram_ctrl_of_match,
},
};
--
2.3.5
--
Regards/Gruss,
Boris.

ECO tip #101: Trim your mails when you reply.
--


\
 
 \ /
  Last update: 2015-06-06 10:21    [W:0.069 / U:1.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site