lkml.org 
[lkml]   [2015]   [Jun]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/5] Add Mediatek MT8173 subsystem clocks support
On 06/05, James Liao wrote:
> Hi Stephen,
>
> On Thu, 2015-06-04 at 14:02 -0700, Stephen Boyd wrote:
> > On 05/29, Sascha Hauer wrote:
> > > Yes. I previously got the impression that the subsystem clocks are not
> > > directly associated to the larbs, but needed to be handled by the larb
> > > code due to some side effect. Now that I saw that the larbs are directly
> > > in the subsystem register space it all makes sense.
> > >
> > > Note that the way Mediatek SoCs are designed around sub modules is bit
> > > unusual and does not fit very well in the Linux directory structure.
> > > Normally SoCs have a single clocks controller which controls all clocks
> > > in the SoC. Then you often have a reset controller providing reset lines
> > > in the SoC. In this case it's clear that the clk driver goes to
> > > drivers/clk/, the reset controller driver to drivers/reset/. Mediatek
> > > SoCs instead have several blocks, each with its own clock and reset
> > > controller. Splitting each block up into parts in drivers/clk/ and
> > > drivers/reset/ leads to quite a code fragmentation.
> > > This is my opinion, it would be great to hear something from others.
> > > Matthias? I'd like to avoid running into a direction that is not
> > > acceptable in the end.
> >
> > We already have drivers registering clocks and resets under
> > drivers/clk, so it's not unheard of. An alternative solution is
> > to make child devices for the clock part and the reset part at
> > runtime in the toplevel driver for the vencsys device (don't do
> > any sort of DT description for this) and use regmap to mediate
> > the register accesses and locking. That way we can put the clk
> > driver in drivers/clk/, the reset driver in drivers/reset, etc.
> > so that logically related code is grouped.
>
> I have a question about the alternative way you mentioned. Currently
> clock providers and consumers describe what clocks they will provide /
> consume in device tree. If we don't describe vencsys clocks in device
> tree, how to get vencsys clocks for drivers that need to control them?
>

Perhaps an example would be best. In DT we would have:

vencsys: vencsys@10000 {
compatible = "mtk,vencsys";
reg = <0x10000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
};

myconsumer@12000 {
compatible = "mtk,vencsys";
reg = <0x12000 0x100>;
clocks = <&vencsys 10>;
clock-names = "core";
};

(Or are the consumers only children of the subsystem?
It's not clear to me)

And then in the mtk,vencsys driver we would create a platform
device named something like "mtk-vencsys-clk" and assign the
of_node of the device to be the of_node that is assigned to the
mtk,vencsys device.

static int vencsys_probe(struct platform_device *pdev)
{
int ret;
struct device_node *np = pdev->dev.of_node;
struct platform_device *clk_pdev;

clk_pdev = platform_device_alloc("mtk-vencsys-clk", -1);
clk_pdev->dev.of_node = of_node;
ret = platform_device_add(clk_pdev);
if (ret)
return ret;
}

Then we could put a mtk-vencsys-clk driver in drivers/clk/ that
does the clk driver part...

static int clk_vencsys_probe(struct platform_device *pdev)
{
int ret;
struct device_node *np = pdev->dev.of_node;
struct regmap *regmap;

ret = of_clk_add_provider(np, of_clk_src_onecell_get, ..);
if (ret)
return ret;

regmap = dev_get_regmap(pdev->dev.parent, NULL);

}

And similar things could be done for the reset driver.

--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project


\
 
 \ /
  Last update: 2015-06-06 03:21    [W:0.119 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site