lkml.org 
[lkml]   [2015]   [Jun]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 7/8] mfd: cros_ec: spi: Add a DT property to delay asserting the CS
Date
From: Alexandru M Stan <amstan@chromium.org>

Some ECs need a little time for waking up before they can accept
SPI data at a high speed. Add a "google,cros-ec-spi-pre-delay"
property to the DT binding to configure this.

If this property isn't set, then no delay will be added. However,
if set it will cause a delay equal to the value passed to it to
be inserted at the beginning of a transaction.

Signed-off-by: Alexandru M Stan <amstan@chromium.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Lee Jones <lee.jones@linaro.org>
---

Changes since v5: None.

Changes since v4: None.

Changes since v3:
- Split DT binding and driver change as suggested by Lee Jones.
- Add tested-by tag from Heiko Stuebner
- Add acked-by tag from Lee Jones.

Changes since v2: None

Changes since v1: None, new patch
---
Documentation/devicetree/bindings/mfd/cros-ec.txt | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/cros-ec.txt b/Documentation/devicetree/bindings/mfd/cros-ec.txt
index 8009c3d87f33..1777916e9e28 100644
--- a/Documentation/devicetree/bindings/mfd/cros-ec.txt
+++ b/Documentation/devicetree/bindings/mfd/cros-ec.txt
@@ -18,6 +18,10 @@ Required properties (SPI):
- reg: SPI chip select

Optional properties (SPI):
+- google,cros-ec-spi-pre-delay: Some implementations of the EC need a little
+ time to wake up from sleep before they can receive SPI transfers at a high
+ clock rate. This property specifies the delay, in usecs, between the
+ assertion of the CS to the start of the first clock pulse.
- google,cros-ec-spi-msg-delay: Some implementations of the EC require some
additional processing time in order to accept new transactions. If the delay
between transactions is not long enough the EC may not be able to respond
--
2.1.4


\
 
 \ /
  Last update: 2015-06-04 10:21    [W:0.059 / U:0.620 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site