lkml.org 
[lkml]   [2015]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: n900 in 4.2-rc0: repeating oopses
On Tuesday 30 June 2015 11:24:04 Pavel Machek wrote:
> Hi!
>
> > Just tried booting 4.2-rc0 on n900 (commit
> > 4a10a91756ef381bced7b88cfb9232f660b92d93) and it is broken. Previous
> > -rc0 version worked. This time, there's some output on console, but
> > too fast for me to read.
> >
> > It seems oopses happen before mounting root. If you have serial
> > console, they should be easy to see.
>
> I tried again according to pali's instructions, and it is still
> broken the same way. Any other ideas? Does it work for you?
>
> diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
> index 69a40cf..ff6f2bf 100644
> --- a/arch/arm/boot/dts/omap3.dtsi
> +++ b/arch/arm/boot/dts/omap3.dtsi
> @@ -570,6 +570,7 @@
> interrupts = <49>;
> dmas = <&sdma 69>;
> dma-names = "rx";
> + status = "disabled";
> };
>
> smartreflex_core: smartreflex@480cb000 {
>
> Pavel
>

Ok, then it is not problem with omap crypto and HS device...

I will try 4.2 at the end of week.

--
Pali Rohár
pali.rohar@gmail.com


\
 
 \ /
  Last update: 2015-06-30 12:21    [W:0.116 / U:0.692 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site