lkml.org 
[lkml]   [2015]   [Jun]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
SubjectRe: imx: apf27: the board no longer boot with latest git kernel
From
Philippe,

On Sat, Jun 27, 2015 at 2:34 PM, Fabio Estevam <festevam@gmail.com> wrote:

> Yes, please submit a formal patch.
>
> I thought it was imx1_timer_init_dt because in imx27.dtsi we have:
>
> compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
>
> So I am wondering if this is correct or it should be
>
> compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; instead?

In addition to the drivers/clocksource/timer-imx-gpt.c patch, could
you also try the change below?

--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -108,7 +108,7 @@
};

gpt1: timer@10003000 {
- compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+ compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
reg = <0x10003000 0x1000>;
interrupts = <26>;
clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>,
@@ -117,7 +117,7 @@
};

gpt2: timer@10004000 {
- compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+ compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
reg = <0x10004000 0x1000>;
interrupts = <25>;
clocks = <&clks IMX27_CLK_GPT2_IPG_GATE>,
@@ -126,7 +126,7 @@
};

gpt3: timer@10005000 {
- compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+ compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
reg = <0x10005000 0x1000>;
interrupts = <24>;
clocks = <&clks IMX27_CLK_GPT3_IPG_GATE>,
@@ -376,7 +376,7 @@
};

gpt4: timer@10019000 {
- compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+ compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
reg = <0x10019000 0x1000>;
interrupts = <4>;
clocks = <&clks IMX27_CLK_GPT4_IPG_GATE>,
@@ -385,7 +385,7 @@
};

gpt5: timer@1001a000 {
- compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+ compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
reg = <0x1001a000 0x1000>;
interrupts = <3>;
clocks = <&clks IMX27_CLK_GPT5_IPG_GATE>,
@@ -436,7 +436,7 @@
};

gpt6: timer@1001f000 {
- compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+ compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
reg = <0x1001f000 0x1000>;
interrupts = <2>;
clocks = <&clks IMX27_CLK_GPT6_IPG_GATE>,

\
 
 \ /
  Last update: 2015-06-27 21:21    [W:0.040 / U:1.580 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site