lkml.org 
[lkml]   [2015]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC][PATCH 00/13] percpu rwsem -v2
On 06/22/2015 09:05 PM, Peter Zijlstra wrote:
> On Mon, Jun 22, 2015 at 08:11:14PM +0200, Daniel Wagner wrote:
>> On 06/22/2015 02:16 PM, Peter Zijlstra wrote:
>>> Also, since Linus thinks lglocks is a failed locking primitive (which I whole
>>> heartedly agree with, its preempt-disable latencies are an abomination), it
>>> also converts the global part of fs/locks's usage of lglock over to a
>>> percpu-rwsem and uses a per-cpu spinlock for the local part. This both provides
>>> another (4th) percpu-rwsem users and removes an lglock user.
>>
>> I did a quick lockperf run with these patches on a 4 socket E5-4610 machine.
>> These microbenches execercise the fs' locks a bit.
>>
>> I suspect I got the wrong tree. The patches did not apply cleanly. The resulting
>> kernel boots fine and doesn't explode... so far...
>
> Its against tip/master, although I expect the locking/core bits that
> were sent to Linus earlier today to be the biggest missing piece.
>
> All I really did was build a kernel with lockdep enabled and boot +
> build a kernel to see it didn't go belly up.
>
>> The results aren't looking too bad. Though building a kernel with 'make -j200'
>> was extreme slow. I'll look into it tomorrow.

So this turns out to be false alarm. I had icecream installed/actived
and that interfered with gcc. Stupid me.

The machine has 0.5TB memory and doesn't seem to be really concerned about
'make -j200'

make clean && time make -j200

mainline 4.1.0
2nd run
real 1m7.595s
user 28m43.125s
sys 3m48.189s


tip v4.1-2756-ge3d06bd
2nd run
real 1m6.871s
user 28m50.803s
sys 3m50.223s
3rd run
real 1m6.974s
user 28m52.093s
sys 3m50.259s


tip v4.1-2769-g6ce2591 (percpu-rwsem)
2nd run
real 1m7.847s
user 29m0.439s
sys 3m51.181s
3rd run
real 1m7.113s
user 29m3.127s
sys 3m51.516s



Compared to 'make -j64' on tip v4.1-2756-ge3d06bd
2nd run
real 1m7.605s
user 28m3.121s
sys 3m52.541s

>> https://git.samba.org/jlayton/linux.git/?p=jlayton/lockperf.git;a=summary
>
> Sweet, I wasn't aware these existed. I'll go have a play.
>
>> posix01
>> mean variance sigma max min
>> 4.1.0 121.9020 27882.5260 166.9806 603.5509 0.0063
>> percpu-rwsem 185.3981 38474.3836 196.1489 580.6532 0.0073
>>
>>
>> posix02
>> mean variance sigma max min
>> 4.1.0 12.7461 3.1802 1.7833 15.5411 8.1018
>> percpu-rwsem 16.2341 4.3038 2.0746 19.3271 11.1751
>>
>
> These two seem to hurt, lemme go look at what they do.

Now here the same tests with tip and tip+percpu-rwsem. The patches
applied cleanly :)

I put all the raw data here[1] in case someone is interested. Some of the
test behave a bit strange, running extremely fast compared to the other runs.
That is probably the result of me trying to reduce the run time to the min.


flock01
mean variance sigma max min
4.1.0 11.7075 816.3341 28.5716 125.6552 0.0021
4.1.0+percpu-rwsem 11.4614 760.1345 27.5705 132.5030 0.0026
tip 6.8390 329.3037 18.1467 81.0373 0.0021
tip+percpu-rwsem 10.0870 546.7435 23.3825 106.2396 0.0026


flock02
mean variance sigma max min
4.1.0 7.0197 1.1812 1.0868 10.6188 5.1706
4.1.0+percpu-rwsem 9.3194 1.3443 1.1594 11.5902 6.6138
tip 7.1057 1.6719 1.2930 11.2362 5.1434
tip+percpu-rwsem 9.0357 1.9874 1.4097 14.0254 6.4380


lease01
mean variance sigma max min
4.1.0 41.8361 23.8462 4.8833 51.3493 28.5859
4.1.0+percpu-rwsem 40.2738 20.8323 4.5642 49.6037 28.0704
tip 30.2617 13.0900 3.6180 36.6398 20.2085
tip+percpu-rwsem 31.2730 17.9787 4.2401 37.8981 19.2944


lease02
mean variance sigma max min
4.1.0 71.2159 12.7763 3.5744 77.8432 58.0390
4.1.0+percpu-rwsem 71.4312 14.7688 3.8430 76.5036 57.8615
tip 20.2019 5.2042 2.2813 23.1071 13.4647
tip+percpu-rwsem 20.8305 6.6631 2.5813 23.8034 11.2815


posix01
mean variance sigma max min
4.1.0 121.9020 27882.5260 166.9806 603.5509 0.0063
4.1.0+percpu-rwsem 185.3981 38474.3836 196.1489 580.6532 0.0073
tip 129.2736 23752.7122 154.1191 474.0604 0.0063
tip+percpu-rwsem 142.6474 24732.1571 157.2646 468.7478 0.0072


posix02
mean variance sigma max min
4.1.0 12.7461 3.1802 1.7833 15.5411 8.1018
4.1.0+percpu-rwsem 16.2341 4.3038 2.0746 19.3271 11.1751
tip 13.2810 5.3958 2.3229 20.1243 8.9361
tip+percpu-rwsem 15.6802 4.7514 2.1798 21.5704 9.4074


posix03
mean variance sigma max min
4.1.0 0.9121 0.0000 0.0000 0.9121 0.9121
4.1.0+percpu-rwsem 0.9379 0.0000 0.0000 0.9379 0.9379
tip 0.8647 0.0009 0.0297 0.9274 0.7995
tip+percpu-rwsem 0.8147 0.0003 0.0161 0.8530 0.7824


posix04
mean variance sigma max min
4.1.0 0.0703 0.0044 0.0664 0.6764 0.0437
4.1.0+percpu-rwsem 0.0675 0.0007 0.0267 0.3236 0.0491
tip 0.0618 0.0027 0.0521 0.5642 0.0453
tip+percpu-rwsem 0.0658 0.0003 0.0175 0.1793 0.0493


cheers,
daniel

[1] http://monom.org/percpu-rwsem/


\
 
 \ /
  Last update: 2015-06-23 12:01    [W:0.207 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site