lkml.org 
[lkml]   [2015]   [Jun]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] ipv6: Fixed source specific default route handling.
Date
You have /128 dst. To override it you need dst/128 AND src/>0 route. ( or just /128 dst and higher metric). 

Sorry if I am bit unclear - can explain better given real keyboard but that is avail only week from now.

-Markus

(on the road, via iPhone)

21.6.2015 23.35、Matthias Schiffer <mschiffer@universe-factory.net> のメッセージ:

>> On 06/22/2015 12:05 AM, Markus Stenberg wrote:
>> Prefsrc is essentially historic non IPv6 construct. IPv6 SAS is based on dst, src, metric ordered lookup just like the routing is too ( lookup rfc, some src specific routing drafts for details ).
>>
>> Therefore I do not see a problem. If you want specific SA, add same route with higher metric and/or (more) specific src match.
>>
>> There might be bugs there tho, but that is how it should work. As SAS is supposed to happen before routing ( see rfc ) the prefsrc is .. Cough.
>>
>> -Markus
>
> Could you explain in detail what you mean with "If you want specific SA,
> add same route with higher metric and/or (more) specific src match."?
> Routes aren't bound to specific addresses except via the "src" attribute
> (which is called prefsrc in the kernel), which is exactly what it not
> working. I can't control the chosen source address at all when
> source-specific routes are involved.
>
> Also, metric-based route selection is broken when source-specific routes
> are involved. The commands mentioned in my first mail will create the
> following configuration:
>
> # ip a
> 3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state
> UNKNOWN group default qlen 500
> link/ether 22:46:f4:9c:9e:3a brd ff:ff:ff:ff:ff:ff
> inet6 fd00::20/64 scope global
> valid_lft forever preferred_lft forever
> inet6 fe80::2046:f4ff:fe9c:9e3a/64 scope link
> valid_lft forever preferred_lft forever
> 4: test@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
> state UNKNOWN group default
> link/ether ae:2b:02:16:23:0f brd ff:ff:ff:ff:ff:ff
> inet6 fd00::1/128 scope global
> valid_lft forever preferred_lft forever
> inet6 fe80::ac2b:2ff:fe16:230f/64 scope link
> valid_lft forever preferred_lft forever
>
> # ip -6 r
> fd00::/64 from fd00::/64 dev eth0 metric 1024
> fd00::1 dev test proto kernel metric 256
> fd00::/64 dev eth0 proto kernel metric 256
>
> The only route I have added manually is the source-specific one, the
> other two have been created by address assignment. Adding a "src"
> address to the source-specific route has no effect.
>
> Even though the source-specific route has a higher metric than the
> generic one, the source-specific one shadows the generic route.
>
> Thanks for your reply,
> Matthias
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2015-06-22 01:21    [W:0.062 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site