lkml.org 
[lkml]   [2015]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/4] mtd: pxa3xx_nand: add a default chunk size
Date
When keeping the configuration set by the bootloader (by using
the marvell,nand-keep-config property), the pxa3xx_nand_detect_config()
function is called and set the chunk size to 512 as a default value if
NDCR_PAGE_SZ is not set.

In the other case, when not keeping the bootloader configuration, no
chunk size is set. Fix this by adding a default chunk size of 512.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
---
drivers/mtd/nand/pxa3xx_nand.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index a4615fcc3d00..94a357d93bab 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -1475,6 +1475,9 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
if (pdata->keep_config && !pxa3xx_nand_detect_config(info))
goto KEEP_CONFIG;

+ /* Set a default chunk size */
+ info->chunk_size = 512;
+
ret = pxa3xx_nand_sensing(info);
if (ret) {
dev_info(&info->pdev->dev, "There is no chip on cs %d!\n",
--
2.4.2


\
 
 \ /
  Last update: 2015-06-02 18:41    [W:0.068 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site