lkml.org 
[lkml]   [2015]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/3] MIPS: R6: Use lightweight SYNC instruction in smp_* memory barriers
Hi Leonid,

On 02/06/15 01:09, Leonid Yegoshin wrote:
> This instructions were specifically designed to work for smp_*() sort of
> memory barriers in MIPS R2/R3/R5 and R6.
>
> Unfortunately, it's description is very cryptic and is done in HW engineering
> style which prevents use of it by SW. This instructions are not mandatory but
> there is a mandatory requirement - if not implemented, then a regular MIPS
> SYNC 0 must be used instead.
>
> The reason for this change is - SYNC 0 is a heavvy-weighted in many CPUs, it may

heavy

> disrupt other cores pipelines etc.
>
> Due to concern about verification of old MIPS R2 compatible cores of other
> vendors it is enforced only for MIPS R6 and other MIPS32/64 R2/R5 processors
> have it configurable.

Is it worth inverting the logic to exclude the platforms you're
concerned about (which also makes it explicit what hardware needs
verifying). For new platforms we don't need to worry about kernel
regressions so much, so it probably makes sense to have them used by
default.

>
> Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
> ---
> arch/mips/Kconfig | 22 ++++++++++++++++++++++
> arch/mips/include/asm/barrier.h | 6 ++++++
> 2 files changed, 28 insertions(+)
>
> diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
> index be384d6a58bb..c7d0cacece3d 100644
> --- a/arch/mips/Kconfig
> +++ b/arch/mips/Kconfig
> @@ -1347,6 +1347,7 @@ config CPU_MIPS32_R2
> select CPU_SUPPORTS_32BIT_KERNEL
> select CPU_SUPPORTS_HIGHMEM
> select CPU_SUPPORTS_MSA
> + select CPU_SUPPORTS_MIPS_LIGHTWEIGHT_SYNC
> select HAVE_KVM
> help
> Choose this option to build a kernel for release 2 or later of the
> @@ -1365,6 +1366,8 @@ config CPU_MIPS32_R6
> select GENERIC_CSUM
> select HAVE_KVM
> select MIPS_O32_FP64_SUPPORT
> + select CPU_SUPPORTS_MIPS_LIGHTWEIGHT_SYNC
> + select WEAK_REORDERING_BEYOND_LLSC
> help
> Choose this option to build a kernel for release 6 or later of the
> MIPS32 architecture. New MIPS processors, starting with the Warrior
> @@ -1399,6 +1402,7 @@ config CPU_MIPS64_R2
> select CPU_SUPPORTS_HIGHMEM
> select CPU_SUPPORTS_HUGEPAGES
> select CPU_SUPPORTS_MSA
> + select CPU_SUPPORTS_MIPS_LIGHTWEIGHT_SYNC
> help
> Choose this option to build a kernel for release 2 or later of the
> MIPS64 architecture. Many modern embedded systems with a 64-bit
> @@ -1415,6 +1419,8 @@ config CPU_MIPS64_R6
> select CPU_SUPPORTS_HIGHMEM
> select CPU_SUPPORTS_MSA
> select GENERIC_CSUM
> + select CPU_SUPPORTS_MIPS_LIGHTWEIGHT_SYNC
> + select WEAK_REORDERING_BEYOND_LLSC
> help
> Choose this option to build a kernel for release 6 or later of the
> MIPS64 architecture. New MIPS processors, starting with the Warrior
> @@ -1876,6 +1882,20 @@ config WEAK_ORDERING
> #
> config WEAK_REORDERING_BEYOND_LLSC
> bool
> +
> +config MIPS_LIGHTWEIGHT_SYNC
> + bool "CPU lightweight SYNC instruction for weak reordering"
> + depends on CPU_SUPPORTS_MIPS_LIGHTWEIGHT_SYNC && WEAK_ORDERING

Worth depending on SMP, so as not to give the user more options than
they need?

> + default y if CPU_MIPSR6
> + help
> + This option enforces a use of "lightweight sync" instructions
> + for SMP (multi-CPU) memory barriers. This instructions are much
> + more faster than a traditional "SYNC 0".
> +
> + If that instructions are not implemented in processor then it is
> + converted to generic "SYNC 0".
> +
> + If you unsure, say N here, it may slightly decrease your performance

"it" is ambiguous. "Saying N" or "this option"? (I guess "saying N", but
its not obvious to an uninformed kernel configurer).

> endmenu
>
> #
> @@ -1928,6 +1948,8 @@ config CPU_SUPPORTS_HUGEPAGES
> bool
> config CPU_SUPPORTS_UNCACHED_ACCELERATED
> bool
> +config CPU_SUPPORTS_MIPS_LIGHTWEIGHT_SYNC
> + bool
> config MIPS_PGD_C0_CONTEXT
> bool
> default y if 64BIT && CPU_MIPSR2 && !CPU_XLP
> diff --git a/arch/mips/include/asm/barrier.h b/arch/mips/include/asm/barrier.h
> index 2b8bbbcb9be0..d2a63abfc7c6 100644
> --- a/arch/mips/include/asm/barrier.h
> +++ b/arch/mips/include/asm/barrier.h
> @@ -96,9 +96,15 @@
> # define smp_rmb() barrier()
> # define smp_wmb() __syncw()
> # else
> +# ifdef CONFIG_MIPS_LIGHTWEIGHT_SYNC
> +# define smp_mb() __asm__ __volatile__("sync 0x10" : : :"memory")
> +# define smp_rmb() __asm__ __volatile__("sync 0x13" : : :"memory")
> +# define smp_wmb() __asm__ __volatile__("sync 0x4" : : :"memory")

binutils appears to support the sync_mb, sync_rmb, sync_wmb aliases
since version 2.21. Can we safely use them?

Cheers
James

> +# else
> # define smp_mb() __asm__ __volatile__("sync" : : :"memory")
> # define smp_rmb() __asm__ __volatile__("sync" : : :"memory")
> # define smp_wmb() __asm__ __volatile__("sync" : : :"memory")
> +# endif
> # endif
> #else
> #define smp_mb() barrier()
>
>

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2015-06-02 13:21    [W:0.137 / U:0.424 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site