lkml.org 
[lkml]   [2015]   [Jun]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 03/20] [SCSI] mpt3sas: Don't block the drive when drive addition under the control of SML
From
Date

> During hot-plugging of a disk(having a flaky link), the disk addition
> stops and any further disk addition or removal doesn't happen on that
> controller.

> This is because, when driver receives DELAY_NOT_RESPONDING event for
> a disk while it is undergoing addition at the SCSI Transport layer,
> the driver would block the I/O to that disk resulting in a
> deadlock. i.e the disk addition work couldn't be completed at the
> SCSI Transport Layer as it can't send any I/Os (such as Inquiry,
> Report LUNs etc) to the disk as I/Os are blocked to this drive. Also
> any subsequent device removal (TARGET_NOT_RESPONDING) or link
> update(RC_PHY_CHANGED) event couldn't be processed as they are in the
> queue to get processed after disk addition event.

Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>

--
Martin K. Petersen Oracle Linux Engineering
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2015-06-19 17:21    [W:0.408 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site