lkml.org 
[lkml]   [2015]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 1/5] Documentation: dmaengine: pxa-dma design
Date
Vinod Koul <vinod.koul@intel.com> writes:

> On Sat, Apr 11, 2015 at 09:40:32PM +0200, Robert Jarzmik wrote:
>> Document the new design of the pxa dma driver.
>> + a) Transfers hot queuing
>> + A driver submitting a transfer and issuing it should be granted the transfer
>> + is queued even on a running DMA channel.
> this is bit confusing, esp latter part.. do you mean "A driver submitting a
> transfer and issuing it should be granted the transfer queue even on a
> running DMA channel" ??

Euh no, I meant that a transfer which is submitted and issued on a _phy_
doesn't wait for a _phy_ to stop and restart, but is submitted on a "running
channel". The other drivers, especially mmp_pdma waited for the phy to stop
before relaunching a new transfer.

I don't have a clear idea on a better wording yet ...

>> + This implies that the queuing doesn't wait for the previous transfer end,
>> + and that the descriptor chaining is not only done in the irq/tasklet code
>> + triggered by the end of the transfer.
> how is it differenat than current dmaengine semantics where you say
> issue_pending() is invoked when current transfer finished? Here is you have
> to do descriptor chaining so bit it.
Your sentence is a bit difficult for me to understand.

>> + c) Channel residue calculation
>> + A channel should be able to report how much advanced is a transfer. The
> in a ^^^^
For v3.

>> + granularity is still descriptor based.
> This is not pxa specfic
True. Do you want me to remove the (c) from the document ?

>> +
>> + d) Channel running state
>> + A driver should be able to query if a channel is running or not. For the
>> + multimedia case, such as video capture, if a transfer is submitted and then
>> + a check of the DMA channel reports a "stopped channel", the transfer should
>> + not be issued until the next "start of frame interrupt", hence the need to
>> + know if a channel is in running or stopped state.
> How do you query that?
With dma_async_is_tx_complete() giving :
- dma_cookie_t last_submitted
- dma_cookie_t last_issued

The channel is still running if (last_submitted < last_issued).

>
>> +
>> + e) Bandwidth guarantee
>> + The PXA architecture has 4 levels of DMAs priorities : high, normal, low.
>> + The high prorities get twice as much bandwidth as the normal, which get twice
>> + as much as the low priorities.
>> + A driver should be able to request a priority, especially the real-time
>> + ones such as pxa_camera with (big) throughputs.
> and how..?
By passing this information :
- in a devicetree environment, check pxad_dma_xlate()
- in a platform device environment, check pxad_filter_fn()

>> + f) Transfer reusability
>> + An issued and finished transfer should be "reusable". The choice of
>> + "DMA_CTRL_ACK" should be left to the client, not the dma driver.
> again how is this pxa specfic, if not documented we should move this to
> dmaengine documentation

Yes, I agree. I should move this to dmaengine slave documentation, in
Documentation/dmaengine/provider.txt (in the Misc notes section). Do you want me
to submit a patch to change the "Undocumented feature" into a properly
documented feature ?

Cheers.

--
Robert


\
 
 \ /
  Last update: 2015-05-08 15:01    [W:0.072 / U:0.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site