lkml.org 
[lkml]   [2015]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] serial: imx: Revert "initialized DMA w/o HW flow enabled"
From
On Thu, May 7, 2015 at 5:24 PM, Sebastian Andrzej Siewior
<sebastian@breakpoint.cc> wrote:
> From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
>
> This basically reverts commit 068500e08dc8 ("serial: imx: initialized
> DMA w/o HW flow enabled") simply because it does not work as expected
> without additional magic which I am not aware of. The DMA mode is only
> used for non-console UARTs so the "standard" boot test won't notice this.
>
> I tested it on various IMX6 (S and Q) boards and the default SDMA firmware
> that is included in ROM does work properly. The SDMA interrupt counter does

Here you say that the ROM SDMA works properly.

> not stop increment (which means the SDMA does not stop working or the ACK
> is working) and I see a lot of 0x00 (sometimes other bytes) which are added
> to the tty buffer which are not part of the data transfer.
> Jiada claimed that there is a firmware which makes it work but failed to
> provide me a link to the firmware. All he said was that it can not be
> shipped as part of the kernel due to license issues. I've found a firmware
> blob in the FSL-tree but this firmware causes only TTY-overflows an *no*
> data is transmitted.
>
> Currently I see no other way out.
>
> Fixes: 068500e08dc8 ("serial: imx: initialized DMA w/o HW flow enabled")
> Cc: Fabio Estevam <fabio.estevam@freescale.com>
> Cc: Jiada Wang <jiada_wang@mentor.com>
> Cc: nicolae.rosia@gmail.com
> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
> ---
> drivers/tty/serial/imx.c | 18 +++++++++++++-----
> 1 file changed, 13 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
> index 8aff0b4d8ddf..e686c75fa4dc 100644
> --- a/drivers/tty/serial/imx.c
> +++ b/drivers/tty/serial/imx.c
> @@ -1113,11 +1113,6 @@ static int imx_startup(struct uart_port *port)
>
> writel(temp & ~UCR4_DREN, sport->port.membase + UCR4);
>
> - /* Can we enable the DMA support? */
> - if (is_imx6q_uart(sport) && !uart_console(port) &&
> - !sport->dma_is_inited)
> - imx_uart_dma_init(sport);
> -
> spin_lock_irqsave(&sport->port.lock, flags);
> /* Reset fifo's and state machines */
> i = 100;
> @@ -1308,6 +1303,17 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
> } else {
> ucr2 |= UCR2_CTSC;
> }
> +
> + /*
> + * Can we enable the DMA support? Be aware that
> + * at least IMX6 needs to load external SDMA firmware in
> + * order work properly. The in-ROM firmware is not
> + * wokring properly.

,but here you say the contrary.

With this fixed (and please also Cc stable):

Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>


\
 
 \ /
  Last update: 2015-05-08 01:21    [W:0.138 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site