lkml.org 
[lkml]   [2015]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v10 00/19] Re-introduce h8300 architecture
At Mon, 4 May 2015 19:27:00 -0700,
Guenter Roeck wrote:
>
> On Mon, May 04, 2015 at 07:41:43PM +0900, Yoshinori Sato wrote:
> > Hello.
> > I will re-introducing h8300.
> >
>
> Hi,
>
> With "make ARCH=h8300 edosk2674_defconfig; make ARCH=h8300",
> I see the following build error:
>
> scripts/Makefile.build:44: arch/h8300/boot/dtb/Makefile: No such file or directory
> make[1]: *** No rule to make target 'arch/h8300/boot/dtb/Makefile'. Stop.
>
> After fixing this up with
>
> diff --git a/arch/h8300/Makefile b/arch/h8300/Makefile
> index c2b24c9..f547870 100644
> --- a/arch/h8300/Makefile
> +++ b/arch/h8300/Makefile
> @@ -26,7 +26,7 @@ CROSS_COMPILE := h8300-unknown-linux-
>
> core-y += arch/$(ARCH)/kernel/ arch/$(ARCH)/mm/ arch/h8300/boot/dts/
> ifneq '$(CONFIG_H8300_BUILTIN_DTB)' '""'
> -core-y += arch/h8300/boot/dtb/
> +core-y += arch/h8300/boot/dts/
> endif
>
> libs-y += arch/$(ARCH)/lib/
>
> I get
>
> arch/h8300/boot/dts/built-in.o: In function `__dtb_edosk2674_end':
> (.dtb.init.rodata+0x8fb): multiple definition of `__dtb_edosk2674_end'
> arch/h8300/boot/dts/built-in.o:(.dtb.init.rodata+0x8fb): first defined here
> arch/h8300/boot/dts/built-in.o: In function `__dtb_edosk2674_begin':
> (.dtb.init.rodata+0x0): multiple definition of `__dtb_edosk2674_begin'
> arch/h8300/boot/dts/built-in.o:(.dtb.init.rodata+0x0): first defined here
> Makefile:932: recipe for target 'vmlinux' failed
>
> This is with compiler and binutils built as you had provided earlier.
>
> ---
>
> Other configurations fail to build with
>
> h8300-unknown-linux-ld: cannot find arch/h8300/boot/dts/built-in.o: No such file or directory
> Makefile:932: recipe for target 'vmlinux' failed
> make: *** [vmlinux] Error 1
>
> ---
>
> Switching from edosk2674_defconfig to h8300h-sim_defconfig without "make
> mrproper" results in:
>
> h8300-unknown-linux-ld: h8300s architecture of input file
> `arch/h8300/boot/dts/built-in.o' is incompatible with h8300h output
>
> ---
>
> Results are with git://git.sourceforge.jp/gitroot/uclinux-h8/linux.git,
> branch h8300.
>
> Guenter

Thanks testing.
It looks Makefile and defconfig problem.

I'll fix next release.

--
Yoshinori Sato
<ysato@users.sourceforge.jp>


\
 
 \ /
  Last update: 2015-05-07 07:01    [W:0.259 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site