lkml.org 
[lkml]   [2015]   [May]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: not syncing: Attempted to kill init! exitcode=0x00000004 ?
From
Hi Shawn,
(Sorry for late reply, I's been a vacation in Japan.)


2015-05-06 17:56 GMT+09:00 Shawn Guo <shawn.guo@linaro.org>:
> On Tue, May 5, 2015 at 7:54 PM, Shawn Guo <shawn.guo@linaro.org> wrote:
>> On Tue, Apr 07, 2015 at 12:34:30PM +0900, Masahiro Yamada wrote:
>>> Hello experts,
>>> I hope this is the correct ML to ask this question.
>>>
>>> I am struggling to port Linux-4.0-rc7 onto my SoC/board,
>>> based on ARM cortex-A9 (single CPU), but the kernel fails to boot
>>> with the error:
>>> "not syncing: Attempted to kill init! exitcode=0x00000004"
>>
>> Hi Masahiro,
>>
>> Have you track it down to the cause? I'm asking because I'm seeing the
>> same issue with v4.0 on a vendor single Cortex-A9 SoC.

Yes, I have already solved my problem.

In my case,

- The interrupt number for the UART device was wrong. Fixed it.
- I regenerated the initramdisk with Buildroot

and then I could boot the kernel successfully.




--
Best Regards
Masahiro Yamada


\
 
 \ /
  Last update: 2015-05-07 04:41    [W:0.059 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site