lkml.org 
[lkml]   [2015]   [May]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 173/208] x86/fpu: Rename user_has_fpu() to fpregs_active()
Date
Rename this function in line with the new FPU nomenclature.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
arch/x86/include/asm/fpu/internal.h | 4 ++--
arch/x86/kernel/fpu/xstate.c | 2 +-
arch/x86/kvm/vmx.c | 2 +-
drivers/lguest/x86/core.c | 6 +++---
4 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/x86/include/asm/fpu/internal.h b/arch/x86/include/asm/fpu/internal.h
index 58c274dfcb62..0f17cd4e4e58 100644
--- a/arch/x86/include/asm/fpu/internal.h
+++ b/arch/x86/include/asm/fpu/internal.h
@@ -358,7 +358,7 @@ static inline void __fpregs_activate(struct fpu *fpu)
* to save the FP state - we'll just take a #NM
* fault and get the FPU access back.
*/
-static inline int user_has_fpu(void)
+static inline int fpregs_active(void)
{
return current->thread.fpu.fpregs_active;
}
@@ -557,7 +557,7 @@ static inline void user_fpu_begin(void)
struct fpu *fpu = &current->thread.fpu;

preempt_disable();
- if (!user_has_fpu())
+ if (!fpregs_active())
fpregs_activate(fpu);
preempt_enable();
}
diff --git a/arch/x86/kernel/fpu/xstate.c b/arch/x86/kernel/fpu/xstate.c
index 28638820ed0e..b8e5fee2aef3 100644
--- a/arch/x86/kernel/fpu/xstate.c
+++ b/arch/x86/kernel/fpu/xstate.c
@@ -310,7 +310,7 @@ int copy_fpstate_to_sigframe(void __user *buf, void __user *buf_fx, int size)
sizeof(struct user_i387_ia32_struct), NULL,
(struct _fpstate_ia32 __user *) buf) ? -1 : 1;

- if (user_has_fpu()) {
+ if (fpregs_active()) {
/* Save the live register state to the user directly. */
if (copy_fpregs_to_sigframe(buf_fx))
return -1;
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 2de55e953842..1c384bf856e5 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1882,7 +1882,7 @@ static void __vmx_load_host_state(struct vcpu_vmx *vmx)
* If the FPU is not active (through the host task or
* the guest vcpu), then restore the cr0.TS bit.
*/
- if (!user_has_fpu() && !vmx->vcpu.guest_fpu_loaded)
+ if (!fpregs_active() && !vmx->vcpu.guest_fpu_loaded)
stts();
load_gdt(this_cpu_ptr(&host_gdt));
}
diff --git a/drivers/lguest/x86/core.c b/drivers/lguest/x86/core.c
index b80e4b8c9b6e..99bb3009e2d5 100644
--- a/drivers/lguest/x86/core.c
+++ b/drivers/lguest/x86/core.c
@@ -251,7 +251,7 @@ void lguest_arch_run_guest(struct lg_cpu *cpu)
* we set it now, so we can trap and pass that trap to the Guest if it
* uses the FPU.
*/
- if (cpu->ts && user_has_fpu())
+ if (cpu->ts && fpregs_active())
stts();

/*
@@ -283,7 +283,7 @@ void lguest_arch_run_guest(struct lg_cpu *cpu)
wrmsr(MSR_IA32_SYSENTER_CS, __KERNEL_CS, 0);

/* Clear the host TS bit if it was set above. */
- if (cpu->ts && user_has_fpu())
+ if (cpu->ts && fpregs_active())
clts();

/*
@@ -301,7 +301,7 @@ void lguest_arch_run_guest(struct lg_cpu *cpu)
* a different CPU. So all the critical stuff should be done
* before this.
*/
- else if (cpu->regs->trapnum == 7 && !user_has_fpu())
+ else if (cpu->regs->trapnum == 7 && !fpregs_active())
fpu__restore();
}

--
2.1.0


\
 
 \ /
  Last update: 2015-05-05 20:41    [W:0.219 / U:2.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site