lkml.org 
[lkml]   [2015]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: dts: odroidxu3: Enable USB3 regulators
W dniu 28.05.2015 o 17:58, Anand Moon pisze:
> Enable regulator for usbdrd3_0 and usbdrd3_1
> From the schematic pin diagram USB3_0 and USB3_1
> is regulated by LDO9 and LD011.
>
> Fix the boot message of failed.
> [ 3.503539] exynos-dwc3 usb@12000000: Looking up vdd33-supply from device tree
> [ 3.503556] exynos-dwc3 usb@12000000: Looking up vdd33-supply property in node /usb@12000000 failed
> [ 3.503568] usb@12000000 supply vdd33 not found, using dummy regulator
> [ 3.509154] exynos-dwc3 usb@12000000: Looking up vdd10-supply from device tree
> [ 3.509170] exynos-dwc3 usb@12000000: Looking up vdd10-supply property in node /usb@12000000 failed
> [ 3.509181] usb@12000000 supply vdd10 not found, using dummy regulator
> [ 3.917548] exynos-dwc3 usb@12400000: Looking up vdd33-supply from device tree
> [ 3.917565] exynos-dwc3 usb@12400000: Looking up vdd33-supply property in node /usb@12400000 failed
> [ 3.917578] usb@12400000 supply vdd33 not found, using dummy regulator
> [ 3.922731] exynos-dwc3 usb@12400000: Looking up vdd10-supply from device tree
> [ 3.922747] exynos-dwc3 usb@12400000: Looking up vdd10-supply property in node /usb@12400000 failed
>

Tested on Odroid XU3-Lite board:
Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

Best regards,
Krzysztof



\
 
 \ /
  Last update: 2015-05-29 13:01    [W:0.079 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site