[lkml]   [2015]   [May]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v5 0/2] iio: adc: vf610: respect ADC clocking limitations
This revision is basically the same as v4, just some wording
improvements. I would appriciate an Ack for the device tree part.
The clock limit values are defined in the data sheet and could
be different per SoC, hence descirbe the hardware limitation...

Changes since v4:
- Remove fussy english
- Drop "iio: adc: vf610: use ADC clock within specification" since
that patch is already applied

Changes since v3:
- Move device tree bindings to driver changes

Changes since v2:
- Add sysfs ABI documentation
- Fix commit message spelling errors

Changes since v1:
- Use ext_info for conversion mode

Stefan Agner (2):
iio: adc: vf610: implement configurable conversion modes
ARM: dts: add property for maximum ADC clock frequencies

Documentation/ABI/testing/sysfs-bus-iio-vf610 | 7 +
.../devicetree/bindings/iio/adc/vf610-adc.txt | 9 ++
arch/arm/boot/dts/vfxxx.dtsi | 4 +
drivers/iio/adc/vf610_adc.c | 146 +++++++++++++++------
4 files changed, 124 insertions(+), 42 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-vf610


 \ /
  Last update: 2015-05-27 15:21    [W:0.084 / U:0.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site