lkml.org 
[lkml]   [2015]   [May]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [alsa-devel] [PATCH] ASoC: fsl_spdif: Don't try to round-up for clock divisor calculation
On Mon, May 25, 2015 at 08:24:25AM -0700, Nicolin Chen wrote:
> On Mon, May 25, 2015 at 12:13:45PM -0300, Fabio Estevam wrote:
> > Hi Nicolin,
> >
> > On Mon, May 25, 2015 at 12:11 PM, Nicolin Chen <nicoleotsuka@gmail.com> wrote:
> >
> > > Hi Mark,
> > >
> > > Is that possible for you to provisionally revert this patch?
> > > I wanted to wait for the test result from Fabio or Zidan in
> > > the Cc list because I don't have a test environment for SPDIF
> > > even though this change seems to make sense.
> >
> > I currently don't have access to a SPDIF receiver to test it.
>
> Okay, let's wait for Zidan then. We only need to test the
> playback route of supporting sample rates.
>
> Thanks
> Nicolin
I don't have the board which supported by community to test spdif out. So i used the imx7 board
and test it with internal branch.
I found that (txclk_df + 1) is better than txclk_df.
I suspect the patch for clk_round_rate() is not in our branch. Could you please tell me which
patch is for clk_round_rate? I want to cherry-pick it to our branch and test it.

Best Regards,
Zidan Wang


\
 
 \ /
  Last update: 2015-05-26 16:21    [W:0.102 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site