lkml.org 
[lkml]   [2015]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] PWM: atmel: fix incorrect CDTY value after disabling
Date
pwm-leds calls .config() and .disable() in a row. This exhibits that it may
happen that the channel gets disabled before CDTY has been updated with CUPD.
The issue gets quite worse with long periods.
So, ensure that at least one period has past before disabling the channel by
polling ISR.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
drivers/pwm/pwm-atmel.c | 13 +++++++++++++
1 file changed, 13 insertions(+)

diff --git a/drivers/pwm/pwm-atmel.c b/drivers/pwm/pwm-atmel.c
index 89f9ca41d9af..054db5aacd7a 100644
--- a/drivers/pwm/pwm-atmel.c
+++ b/drivers/pwm/pwm-atmel.c
@@ -8,6 +8,7 @@
*/

#include <linux/clk.h>
+#include <linux/delay.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/module.h>
@@ -21,6 +22,7 @@
#define PWM_ENA 0x04
#define PWM_DIS 0x08
#define PWM_SR 0x0C
+#define PWM_ISR 0x1C
/* Bit field in SR */
#define PWM_SR_ALL_CH_ON 0x0F

@@ -243,6 +245,17 @@ static int atmel_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
static void atmel_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
+ unsigned long timeout = jiffies + 2 * HZ;
+
+ /*
+ * Wait for at least a complete period to have passed before disabling a
+ * channel to be sure that CDTY has been updated
+ */
+ atmel_pwm_readl(atmel_pwm, PWM_ISR);
+
+ while (!(atmel_pwm_readl(atmel_pwm, PWM_ISR) & (1 << pwm->hwpwm)) &&
+ time_before(jiffies, timeout))
+ usleep_range(10, 100);

atmel_pwm_writel(atmel_pwm, PWM_DIS, 1 << pwm->hwpwm);

--
2.1.4


\
 
 \ /
  Last update: 2015-05-25 16:01    [W:0.067 / U:0.596 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site