lkml.org 
[lkml]   [2015]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 1/1] net: core: 'ethtool' issue with querying phy settings
From
From: Arun Parameswaran <aparames@broadcom.com>
Date: Wed, 20 May 2015 14:35:30 -0700

> When trying to configure the settings for PHY1, using commands
> like 'ethtool -s eth0 phyad 1 speed 100', the 'ethtool' seems to
> modify other settings apart from the speed of the PHY1, in the
> above case.
>
> The ethtool seems to query the settings for PHY0, and use this
> as the base to apply the new settings to the PHY1. This is
> causing the other settings of the PHY 1 to be wrongly
> configured.
>
> The issue is caused by the '_ethtool_get_settings()' API, which
> gets called because of the 'ETHTOOL_GSET' command, is clearing
> the 'cmd' pointer (of type 'struct ethtool_cmd') by calling
> memset. This clears all the parameters (if any) passed for the
> 'ETHTOOL_GSET' cmd. So the driver's callback is always invoked
> with 'cmd->phy_address' as '0'.
>
> The '_ethtool_get_settings()' is called from other files in the
> 'net/core'. So the fix is applied to the 'ethtool_get_settings()'
> which is only called in the context of the 'ethtool'.
>
> Signed-off-by: Arun Parameswaran <aparames@broadcom.com>
> Reviewed-by: Ray Jui <rjui@broadcom.com>
> Reviewed-by: Scott Branden <sbranden@broadcom.com>

Applied and queued up for -stable, thanks.


\
 
 \ /
  Last update: 2015-05-22 22:41    [W:0.089 / U:0.560 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site