lkml.org 
[lkml]   [2015]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [Patch v6 2/2] dmaengine: Add ADM driver
Hi,

On 03/17/2015 11:16 AM, Andy Gross wrote:
> Add the DMA engine driver for the QCOM Application Data Mover (ADM) DMA
> controller found in the MSM8x60 and IPQ/APQ8064 platforms.
>
> The ADM supports both memory to memory transactions and memory
> to/from peripheral device transactions. The controller also provides flow
> control capabilities for transactions to/from peripheral devices.
>
> The initial release of this driver supports slave transfers to/from peripherals
> and also incorporates CRCI (client rate control interface) flow control.
>
> Signed-off-by: Andy Gross <agross@codeaurora.org>
> ---
> drivers/dma/Kconfig | 10 +
> drivers/dma/Makefile | 1 +
> drivers/dma/qcom_adm.c | 900 ++++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 911 insertions(+)
> create mode 100644 drivers/dma/qcom_adm.c
>
> diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
> index a874b6e..6919013 100644
> --- a/drivers/dma/Kconfig
> +++ b/drivers/dma/Kconfig
> @@ -473,4 +473,14 @@ config QCOM_BAM_DMA
> Enable support for the QCOM BAM DMA controller. This controller
> provides DMA capabilities for a variety of on-chip devices.
>
> +config QCOM_ADM
> + tristate "Qualcomm ADM support"
> + depends on ARCH_QCOM || (COMPILE_TEST && OF && ARM)
> + select DMA_ENGINE
> + select DMA_VIRTUAL_CHANNELS
> + ---help---
> + Enable support for the Qualcomm ADM DMA controller. This controller
> + provides DMA capabilities for both general purpose and on-chip
> + peripheral devices.
> +
> endif
> diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
> index f915f61..7f0fbe6 100644
> --- a/drivers/dma/Makefile
> +++ b/drivers/dma/Makefile
> @@ -51,3 +51,4 @@ obj-$(CONFIG_INTEL_MIC_X100_DMA) += mic_x100_dma.o
> obj-$(CONFIG_NBPFAXI_DMA) += nbpfaxi.o
> obj-$(CONFIG_DMA_SUN6I) += sun6i-dma.o
> obj-$(CONFIG_IMG_MDC_DMA) += img-mdc-dma.o
> +obj-$(CONFIG_QCOM_ADM) += qcom_adm.o
> diff --git a/drivers/dma/qcom_adm.c b/drivers/dma/qcom_adm.c
> new file mode 100644
> index 0000000..7f8c119
> --- /dev/null
> +++ b/drivers/dma/qcom_adm.c
> @@ -0,0 +1,900 @@
> +/*
> + * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/io.h>
> +#include <linux/init.h>
> +#include <linux/slab.h>
> +#include <linux/module.h>
> +#include <linux/interrupt.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/scatterlist.h>
> +#include <linux/device.h>
> +#include <linux/platform_device.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_dma.h>
> +#include <linux/reset.h>
> +#include <linux/clk.h>
> +#include <linux/dmaengine.h>
> +
> +#include "dmaengine.h"
> +#include "virt-dma.h"
> +
> +/* ADM registers - calculated from channel number and security domain */
> +#define ADM_CHAN_MULTI 0x4
> +#define ADM_CI_MULTI 0x4
> +#define ADM_CRCI_MULTI 0x4
> +#define ADM_EE_MULTI 0x800
> +#define ADM_CHAN_OFFS(chan) (ADM_CHAN_MULTI * chan)
> +#define ADM_EE_OFFS(ee) (ADM_EE_MULTI * ee)
> +#define ADM_CHAN_EE_OFFS(chan, ee) (ADM_CHAN_OFFS(chan) + ADM_EE_OFFS(ee))
> +#define ADM_CHAN_OFFS(chan) (ADM_CHAN_MULTI * chan)
> +#define ADM_CI_OFFS(ci) (ADM_CHAN_OFF(ci))
> +#define ADM_CH_CMD_PTR(chan, ee) (ADM_CHAN_EE_OFFS(chan, ee))
> +#define ADM_CH_RSLT(chan, ee) (0x40 + ADM_CHAN_EE_OFFS(chan, ee))
> +#define ADM_CH_FLUSH_STATE0(chan, ee) (0x80 + ADM_CHAN_EE_OFFS(chan, ee))
> +#define ADM_CH_STATUS_SD(chan, ee) (0x200 + ADM_CHAN_EE_OFFS(chan, ee))
> +#define ADM_CH_CONF(chan) (0x240 + ADM_CHAN_OFFS(chan))
> +#define ADM_CH_RSLT_CONF(chan, ee) (0x300 + ADM_CHAN_EE_OFFS(chan, ee))
> +#define ADM_SEC_DOMAIN_IRQ_STATUS(ee) (0x380 + ADM_EE_OFFS(ee))
> +#define ADM_CI_CONF(ci) (0x390 + ci * ADM_CI_MULTI)
> +#define ADM_GP_CTL 0x3d8
> +#define ADM_CRCI_CTL(crci, ee) (0x400 + crci * ADM_CRCI_MULTI + \
> + ADM_EE_OFFS(ee))
> +
> +/* channel status */
> +#define ADM_CH_STATUS_VALID BIT(1)
> +
> +/* channel result */
> +#define ADM_CH_RSLT_VALID BIT(31)
> +#define ADM_CH_RSLT_ERR BIT(3)
> +#define ADM_CH_RSLT_FLUSH BIT(2)
> +#define ADM_CH_RSLT_TPD BIT(1)
> +
> +/* channel conf */
> +#define ADM_CH_CONF_SHADOW_EN BIT(12)
> +#define ADM_CH_CONF_MPU_DISABLE BIT(11)
> +#define ADM_CH_CONF_PERM_MPU_CONF BIT(9)
> +#define ADM_CH_CONF_FORCE_RSLT_EN BIT(7)
> +#define ADM_CH_CONF_SEC_DOMAIN(ee) (((ee & 0x3) << 4) | ((ee & 0x4) << 11))
> +
> +/* channel result conf */
> +#define ADM_CH_RSLT_CONF_FLUSH_EN BIT(1)
> +#define ADM_CH_RSLT_CONF_IRQ_EN BIT(0)
> +
> +/* CRCI CTL */
> +#define ADM_CRCI_CTL_MUX_SEL BIT(18)
> +#define ADM_CRCI_CTL_RST BIT(17)
> +
> +/* CI configuration */
> +#define ADM_CI_RANGE_END(x) (x << 24)
> +#define ADM_CI_RANGE_START(x) (x << 16)
> +#define ADM_CI_BURST_4_WORDS BIT(2)
> +#define ADM_CI_BURST_8_WORDS BIT(3)
> +
> +/* GP CTL */
> +#define ADM_GP_CTL_LP_EN BIT(12)
> +#define ADM_GP_CTL_LP_CNT(x) (x << 8)
> +
> +/* Command pointer list entry */
> +#define ADM_CPLE_LP BIT(31)
> +#define ADM_CPLE_CMD_PTR_LIST BIT(29)
> +
> +/* Command list entry */
> +#define ADM_CMD_LC BIT(31)
> +#define ADM_CMD_DST_CRCI(n) (((n) & 0xf) << 7)
> +#define ADM_CMD_SRC_CRCI(n) (((n) & 0xf) << 3)
> +
> +#define ADM_CMD_TYPE_SINGLE 0x0
> +#define ADM_CMD_TYPE_BOX 0x3
> +
> +#define ADM_CRCI_MUX_SEL BIT(4)
> +#define ADM_DESC_ALIGN 8
> +#define ADM_MAX_XFER (SZ_64K-1)
> +#define ADM_MAX_ROWS (SZ_64K-1)
> +#define ADM_MAX_CHANNELS 16
> +
> +struct adm_desc_hw_box {
> + u32 cmd;
> + u32 src_addr;
> + u32 dst_addr;
> + u32 row_len;
> + u32 num_rows;
> + u32 row_offset;
> +};
> +
> +struct adm_desc_hw_single {
> + u32 cmd;
> + u32 src_addr;
> + u32 dst_addr;
> + u32 len;
> +};
> +
> +struct adm_async_desc {
> + struct virt_dma_desc vd;
> + struct adm_device *adev;
> +
> + size_t length;
> + enum dma_transfer_direction dir;
> + dma_addr_t dma_addr;
> + size_t dma_len;
> +
> + void *cpl;
> + dma_addr_t cp_addr;
> + u32 crci;
> + u32 mux;
> + u32 blk_size;
> +};
> +
> +struct adm_chan {
> + struct virt_dma_chan vc;
> + struct adm_device *adev;
> +
> + /* parsed from DT */
> + u32 id; /* channel id */
> +
> + struct adm_async_desc *curr_txd;
> + struct dma_slave_config slave;
> + struct list_head node;
> +
> + int error;
> + int initialized;
> +};
> +
> +static inline struct adm_chan *to_adm_chan(struct dma_chan *common)
> +{
> + return container_of(common, struct adm_chan, vc.chan);
> +}
> +
> +struct adm_device {
> + void __iomem *regs;
> + struct device *dev;
> + struct dma_device common;
> + struct device_dma_parameters dma_parms;
> + struct adm_chan *channels;
> +
> + u32 ee;
> +
> + struct clk *core_clk;
> + struct clk *iface_clk;
> +
> + struct reset_control *clk_reset;
> + struct reset_control *c0_reset;
> + struct reset_control *c1_reset;
> + struct reset_control *c2_reset;
> + int irq;
> +};
> +
> +/**
> + * adm_free_chan - Frees dma resources associated with the specific channel
> + *
> + * Free all allocated descriptors associated with this channel
> + *
> + */
> +static void adm_free_chan(struct dma_chan *chan)
> +{
> + /* free all queued descriptors */
> + vchan_free_chan_resources(to_virt_chan(chan));
> +}
> +
> +/**
> + * adm_get_blksize - Get block size from burst value
> + *
> + */
> +static int adm_get_blksize(unsigned int burst)
> +{
> + int ret;
> +
> + switch (burst) {
> + case 16:
> + case 32:
> + case 64:
> + case 128:
> + ret = ffs(burst>>4) - 1;
> + break;
> + case 192:
> + ret = 4;
> + break;
> + case 256:
> + ret = 5;
> + break;
> + default:
> + ret = -EINVAL;
> + break;
> + }
> +
> + return ret;
> +}
> +
> +/**
> + * adm_process_fc_descriptors - Process descriptors for flow controlled xfers
> + *
> + * @achan: ADM channel
> + * @desc: Descriptor memory pointer
> + * @sg: Scatterlist entry
> + * @crci: CRCI value
> + * @burst: Burst size of transaction
> + * @direction: DMA transfer direction
> + */
> +static void *adm_process_fc_descriptors(struct adm_chan *achan,
> + void *desc, struct scatterlist *sg, u32 crci, u32 burst,
> + enum dma_transfer_direction direction)
> +{
> + struct adm_desc_hw_box *box_desc;
> + struct adm_desc_hw_single *single_desc;
> + u32 remainder = sg_dma_len(sg);
> + u32 rows, row_offset, crci_cmd;
> + u32 mem_addr = sg_dma_address(sg);
> + u32 *incr_addr = &mem_addr;
> + u32 *src, *dst;
> +
> + if (direction == DMA_DEV_TO_MEM) {
> + crci_cmd = ADM_CMD_SRC_CRCI(crci);
> + row_offset = burst;
> + src = &achan->slave.src_addr;
> + dst = &mem_addr;
> + } else {
> + crci_cmd = ADM_CMD_DST_CRCI(crci);
> + row_offset = burst << 16;
> + src = &mem_addr;
> + dst = &achan->slave.dst_addr;
> + }
> +
> + do {
> + box_desc = desc;
> + box_desc->cmd = ADM_CMD_TYPE_BOX | crci_cmd;
> + box_desc->row_offset = row_offset;
> + box_desc->src_addr = *src;
> + box_desc->dst_addr = *dst;
> +
> + rows = remainder / burst;
> + rows = min_t(u32, rows, ADM_MAX_ROWS);
> + box_desc->num_rows = rows << 16 | rows;
> + box_desc->row_len = burst << 16 | burst;
> +
> + *incr_addr += burst * rows;
> + remainder -= burst * rows;
> + desc += sizeof(*box_desc);
> + } while (remainder >= burst);

The piece of code doesn't work if sg length is less than burst size. The
rows would come out as 0, incr_addr and remainder won't change. But the
desc pointer would be still incremented.

The ADM hardware will see a corrupt box descriptor, followed by a single
descriptor in the case of sg length < burst.

Other than this, patch looks good to me.

Thanks,
Archit

--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project


\
 
 \ /
  Last update: 2015-05-21 11:01    [W:0.106 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site