lkml.org 
[lkml]   [2015]   [May]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 10/11] irqchip / GICv2 / ACPI: Consolidate GICv2 ACPI related init code
Hi Hanjun,

On 05/18/2015 02:59 PM, Hanjun Guo wrote:
> Move GICv2 ACPI related init code in irq-gic.c to irq-gic-acpi.c,
> this can make the ACPI related GIC init code slef-contained.
>
> Introduce set_acpi_core_irqdomain() to set acpi_irqdomain then
> it will be no need to make gic_data[] as a global value, and
> it will save the confilcts with GICv3's gic_data in the later
> patch.
>
> acpi_gic_parse_distributor() have the same function as
> gic_acpi_parse_madt_distributor() to get the GIC distributor
> physical base address, so just remove the duplicate one, and
> only get the GIC version when it is unknown.
>
> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
> ---
> drivers/irqchip/irq-gic-acpi.c | 95 +++++++++++++++++++++++++++++++-
> drivers/irqchip/irq-gic.c | 103 +----------------------------------
> include/linux/irqchip/arm-gic-acpi.h | 5 ++
> 3 files changed, 101 insertions(+), 102 deletions(-)
>
> diff --git a/drivers/irqchip/irq-gic-acpi.c b/drivers/irqchip/irq-gic-acpi.c
> index 1388d9e..8463e48 100644
> --- a/drivers/irqchip/irq-gic-acpi.c
> +++ b/drivers/irqchip/irq-gic-acpi.c
> @@ -13,12 +13,16 @@
>
> #include <linux/acpi.h>
> #include <linux/init.h>
> +#include <linux/irqchip/arm-gic.h>
> #include <linux/irqchip/arm-gic-acpi.h>
> #include <linux/irqchip/arm-gic-v3.h>

arm-gic.h and arm-gic-v3.h describe register map for respective drivers
and should be used separately within parent driver only.

Tomasz

>
> +#include "irqchip.h"
> +
> /* GIC version presented in MADT GIC distributor structure */
> static u8 gic_version __initdata = ACPI_MADT_GIC_VER_UNKNOWN;
>
> +/* GIC distributor physical base address, which is needed for both GICv2/3 */
> static phys_addr_t dist_phy_base __initdata;
>
> u8 __init acpi_gic_version(void)
> @@ -26,6 +30,11 @@ u8 __init acpi_gic_version(void)
> return gic_version;
> }
>
> +void __init set_acpi_core_irqdomain(struct irq_domain *domain)
> +{
> + acpi_irq_domain = domain;
> +}
> +
> static int __init
> acpi_gic_parse_distributor(struct acpi_subtable_header *header,
> const unsigned long end)
> @@ -37,8 +46,9 @@ acpi_gic_parse_distributor(struct acpi_subtable_header *header,
> if (BAD_MADT_ENTRY(dist, end))
> return -EINVAL;
>
> - gic_version = dist->gic_version;
> dist_phy_base = dist->base_address;
> + if (gic_version == ACPI_MADT_GIC_VER_UNKNOWN)
> + gic_version = dist->gic_version;
> return 0;
> }
>
> @@ -114,3 +124,86 @@ int __init acpi_gic_version_init(void)
>
> return 0;
> }
> +
> +static phys_addr_t cpu_phy_base __initdata;
> +
> +static int __init
> +gic_acpi_parse_madt_cpu(struct acpi_subtable_header *header,
> + const unsigned long end)
> +{
> + struct acpi_madt_generic_interrupt *processor;
> + phys_addr_t gic_cpu_base;
> + static int cpu_base_assigned;
> +
> + processor = (struct acpi_madt_generic_interrupt *)header;
> +
> + if (BAD_MADT_ENTRY(processor, end))
> + return -EINVAL;
> +
> + /*
> + * There is no support for non-banked GICv1/2 register in ACPI spec.
> + * All CPU interface addresses have to be the same.
> + */
> + gic_cpu_base = processor->base_address;
> + if (cpu_base_assigned && gic_cpu_base != cpu_phy_base)
> + return -EINVAL;
> +
> + cpu_phy_base = gic_cpu_base;
> + cpu_base_assigned = 1;
> + return 0;
> +}
> +
> +static int __init
> +gic_v2_acpi_init(struct acpi_table_header *table)
> +{
> + void __iomem *cpu_base, *dist_base;
> + int count;
> +
> + if (acpi_gic_version() >= ACPI_MADT_GIC_VER_V3)
> + return -ENODEV;
> +
> + /* Collect CPU base addresses */
> + count = acpi_parse_entries(ACPI_SIG_MADT,
> + sizeof(struct acpi_table_madt),
> + gic_acpi_parse_madt_cpu, table,
> + ACPI_MADT_TYPE_GENERIC_INTERRUPT, 0);
> + if (count <= 0) {
> + pr_err("No valid GICC entries exist\n");
> + return -EINVAL;
> + }
> +
> + /*
> + * Find distributor base address. We expect one distributor entry since
> + * ACPI 5.1 spec neither support multi-GIC instances nor GIC cascade.
> + */
> + count = acpi_parse_entries(ACPI_SIG_MADT,
> + sizeof(struct acpi_table_madt),
> + acpi_gic_parse_distributor, table,
> + ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR, 0);
> + if (count <= 0) {
> + pr_err("No valid GICD entries exist\n");
> + return -EINVAL;
> + } else if (count > 1) {
> + pr_err("More than one GICD entry detected\n");
> + return -EINVAL;
> + }
> +
> + cpu_base = ioremap(cpu_phy_base, ACPI_GIC_CPU_IF_MEM_SIZE);
> + if (!cpu_base) {
> + pr_err("Unable to map GICC registers\n");
> + return -ENOMEM;
> + }
> +
> + dist_base = ioremap(dist_phy_base, ACPI_GICV2_DIST_MEM_SIZE);
> + if (!dist_base) {
> + pr_err("Unable to map GICD registers\n");
> + iounmap(cpu_base);
> + return -ENOMEM;
> + }
> +
> + gic_init_bases(0, -1, dist_base, cpu_base, 0, NULL);
> +
> + acpi_irq_model = ACPI_IRQ_MODEL_GIC;
> + return 0;
> +}
> +IRQCHIP_ACPI_DECLARE(gic_v2, ACPI_SIG_MADT, gic_v2_acpi_init);
> diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
> index 869a69f..2f934fe 100644
> --- a/drivers/irqchip/irq-gic.c
> +++ b/drivers/irqchip/irq-gic.c
> @@ -986,6 +986,8 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start,
> if (WARN_ON(!gic->domain))
> return;
>
> + set_acpi_core_irqdomain(gic->domain);
> +
> if (gic_nr == 0) {
> #ifdef CONFIG_SMP
> set_smp_cross_call(gic_raise_softirq);
> @@ -1047,104 +1049,3 @@ IRQCHIP_DECLARE(msm_8660_qgic, "qcom,msm-8660-qgic", gic_of_init);
> IRQCHIP_DECLARE(msm_qgic2, "qcom,msm-qgic2", gic_of_init);
>
> #endif
> -
> -#ifdef CONFIG_ACPI
> -static phys_addr_t dist_phy_base, cpu_phy_base __initdata;
> -
> -static int __init
> -gic_acpi_parse_madt_cpu(struct acpi_subtable_header *header,
> - const unsigned long end)
> -{
> - struct acpi_madt_generic_interrupt *processor;
> - phys_addr_t gic_cpu_base;
> - static int cpu_base_assigned;
> -
> - processor = (struct acpi_madt_generic_interrupt *)header;
> -
> - if (BAD_MADT_ENTRY(processor, end))
> - return -EINVAL;
> -
> - /*
> - * There is no support for non-banked GICv1/2 register in ACPI spec.
> - * All CPU interface addresses have to be the same.
> - */
> - gic_cpu_base = processor->base_address;
> - if (cpu_base_assigned && gic_cpu_base != cpu_phy_base)
> - return -EINVAL;
> -
> - cpu_phy_base = gic_cpu_base;
> - cpu_base_assigned = 1;
> - return 0;
> -}
> -
> -static int __init
> -gic_acpi_parse_madt_distributor(struct acpi_subtable_header *header,
> - const unsigned long end)
> -{
> - struct acpi_madt_generic_distributor *dist;
> -
> - dist = (struct acpi_madt_generic_distributor *)header;
> -
> - if (BAD_MADT_ENTRY(dist, end))
> - return -EINVAL;
> -
> - dist_phy_base = dist->base_address;
> - return 0;
> -}
> -
> -static int __init
> -gic_v2_acpi_init(struct acpi_table_header *table)
> -{
> - void __iomem *cpu_base, *dist_base;
> - int count;
> -
> - if (acpi_gic_version() >= ACPI_MADT_GIC_VER_V3)
> - return -ENODEV;
> -
> - /* Collect CPU base addresses */
> - count = acpi_parse_entries(ACPI_SIG_MADT,
> - sizeof(struct acpi_table_madt),
> - gic_acpi_parse_madt_cpu, table,
> - ACPI_MADT_TYPE_GENERIC_INTERRUPT, 0);
> - if (count <= 0) {
> - pr_err("No valid GICC entries exist\n");
> - return -EINVAL;
> - }
> -
> - /*
> - * Find distributor base address. We expect one distributor entry since
> - * ACPI 5.1 spec neither support multi-GIC instances nor GIC cascade.
> - */
> - count = acpi_parse_entries(ACPI_SIG_MADT,
> - sizeof(struct acpi_table_madt),
> - gic_acpi_parse_madt_distributor, table,
> - ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR, 0);
> - if (count <= 0) {
> - pr_err("No valid GICD entries exist\n");
> - return -EINVAL;
> - } else if (count > 1) {
> - pr_err("More than one GICD entry detected\n");
> - return -EINVAL;
> - }
> -
> - cpu_base = ioremap(cpu_phy_base, ACPI_GIC_CPU_IF_MEM_SIZE);
> - if (!cpu_base) {
> - pr_err("Unable to map GICC registers\n");
> - return -ENOMEM;
> - }
> -
> - dist_base = ioremap(dist_phy_base, ACPI_GICV2_DIST_MEM_SIZE);
> - if (!dist_base) {
> - pr_err("Unable to map GICD registers\n");
> - iounmap(cpu_base);
> - return -ENOMEM;
> - }
> -
> - gic_init_bases(0, -1, dist_base, cpu_base, 0, NULL);
> - acpi_irq_domain = gic_data[0].domain;
> -
> - acpi_irq_model = ACPI_IRQ_MODEL_GIC;
> - return 0;
> -}
> -IRQCHIP_ACPI_DECLARE(gic_v2, ACPI_SIG_MADT, gic_v2_acpi_init);
> -#endif
> diff --git a/include/linux/irqchip/arm-gic-acpi.h b/include/linux/irqchip/arm-gic-acpi.h
> index 245386d..f4a17c7 100644
> --- a/include/linux/irqchip/arm-gic-acpi.h
> +++ b/include/linux/irqchip/arm-gic-acpi.h
> @@ -25,5 +25,10 @@ extern struct irq_domain *acpi_irq_domain;
>
> int acpi_gic_version_init(void);
> u8 acpi_gic_version(void);
> +
> +void set_acpi_core_irqdomain(struct irq_domain *domain);
> +#else
> +#define set_acpi_core_irqdomain(domain)
> #endif /* CONFIG_ACPI */
> +
> #endif /* ARM_GIC_ACPI_H_ */
>


\
 
 \ /
  Last update: 2015-05-20 23:01    [W:0.152 / U:0.636 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site