lkml.org 
[lkml]   [2015]   [May]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCHv2] am335x-evm: add bluetooth support
* Eyal Reizer <eyalreizer@gmail.com> [150504 05:43]:
> From: Eliad Peller <eliad@wizery.com>
>
> uart1 is used for connecting to wilink8 bluetooth subsystem.
> add the needed muxes and definitions.
>
> Signed-off-by: Eliad Peller <eliad@wizery.com>
> Signed-off-by: Eyal Reizer <eyalr@ti.com>

Applying into omap-for-v4.2/dt thanks.

Tony

> ---
> Changes in v2:
> removed ti shared transport bindings
>
> arch/arm/boot/dts/am335x-evm.dts | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
> index 0f398fa..765be27 100644
> --- a/arch/arm/boot/dts/am335x-evm.dts
> +++ b/arch/arm/boot/dts/am335x-evm.dts
> @@ -191,6 +191,15 @@
> >;
> };
>
> + uart1_pins: pinmux_uart1_pins {
> + pinctrl-single,pins = <
> + 0x178 (PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */
> + 0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */
> + 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
> + 0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
> + >;
> + };
> +
> clkout2_pin: pinmux_clkout2_pin {
> pinctrl-single,pins = <
> 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
> @@ -357,6 +366,13 @@
> status = "okay";
> };
>
> +&uart1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart1_pins>;
> +
> + status = "okay";
> +};
> +
> &i2c0 {
> pinctrl-names = "default";
> pinctrl-0 = <&i2c0_pins>;
> --
> 1.7.9.5
>


\
 
 \ /
  Last update: 2015-05-20 20:21    [W:0.043 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site