lkml.org 
[lkml]   [2015]   [May]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/3] gpiolib: debugfs: display gpios requested as irq only
Date
Now GPIOs, wich are requested as IRQ only, will not be displayed
through GPIO debugfs. For example:
# cat /proc/interrupts
CPU0 CPU1
...
209: 0 0 4805d000.gpio 11 Edge 0-0021

# cat /debug/gpio
...
GPIOs 160-191, platform/4805d000.gpio, gpio:
<--- no info about gpio used as IRQ only here

GPIOs 192-223, platform/48051000.gpio, gpio:
gpio-203 (vtt_fixed ) out hi
...

Hence, improve GPIO debugfs code to show such kind of GPIOs

After this patch sys/kernel/debug/gpio will produce following output:

# cat /debug/gpio
...
GPIOs 160-191, platform/4805d000.gpio, gpio:
gpio-171 ((null) ) in hi IRQ

GPIOs 192-223, platform/48051000.gpio, gpio:
gpio-203 (vtt_fixed ) out hi

Cc: Johan Hovold <johan@kernel.org>
Signed-off-by: Grygorii Strashko <grygorii.strashko@linaro.org>
---
drivers/gpio/gpiolib.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 59eaa23..399ce2f 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -2259,7 +2259,8 @@ static void gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip)
int is_irq;

for (i = 0; i < chip->ngpio; i++, gpio++, gdesc++) {
- if (!test_bit(FLAG_REQUESTED, &gdesc->flags))
+ if (!test_bit(FLAG_REQUESTED, &gdesc->flags) &&
+ !test_bit(FLAG_USED_AS_IRQ, &gdesc->flags))
continue;

gpiod_get_direction(gdesc);
--
1.9.1


\
 
 \ /
  Last update: 2015-05-20 12:41    [W:0.057 / U:1.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site