lkml.org 
[lkml]   [2015]   [May]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH 1/4] spi: spidev: Add Google SPI flash compatible string
Hello Baruch,

On 05/19/2015 09:53 PM, Baruch Siach wrote:
> Hi Javier,
>
> On Tue, May 19, 2015 at 03:34:11PM +0200, Javier Martinez Canillas wrote:
>> Google Chromebooks have a SPI flash that is used to store firmware and
>> different system parameters and data (i.e: Google Binary Block flags).
>>
>> Since there isn't a driver for it yet, the spidev interface is used to
>> access the flash from user-space (i.e: using the flashrom tool).
>>
>> Add a "google,spi-flash" compatible string so the Device Tree sources
>> use it instead of the "spidev" compatible which does not describe the
>> real HW and is just a Linux implementation detail.
>>
>> A generic "google,spi-flash" OF device ID is used instead of the actual
>> vendor/model because these chips are commodity parts that are sourced
>> from multiple vendors. So specifying the exact vendor and model in the
>> DTS will add a maintenance burden with no real gain (the parts are 100%
>> compatible anyways) and will likely result in it simply being wrong for
>> a sizeable fraction of the machines.
>
> The compatible string and dt binding should be documented somewhere under
> Documentation/devicetree/bindings/. Also, please keep the dt list on Cc for dt
> related patches.
>

Yes, I didn't add a binding doc because this is mostly a RFC to see if
Mark finds the approach feasible but yes I should had included anyways,
sorry about that.

I'll add when posting as a proper patch if he agrees with the solution.

> baruch
>

Best regards,
Javier


\
 
 \ /
  Last update: 2015-05-20 10:21    [W:0.110 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site