lkml.org 
[lkml]   [2015]   [May]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH 0/5] Add Cygnus PCIe PHY support
    Date
    This patch series adds support for the Cygnus PCIe PHY and support of MDC/MDIO
    interface found in various iProc based of SoCs. The iProc MDC/MDIO interface
    can be used by the host processor to communicate with various internal
    Serdes/PHYs including Ethernet, PCIe, USB, etc.

    This patch series is based on Linux v4.1-rc4 and is avaliable in:
    https://github.com/Broadcom/cygnus-linux/tree/cygnus-pcie-phy-v1

    Ray Jui (5):
    phy: iproc-mdio: Define DT binding
    phy: iproc-mdio: Initial iProc MDC/MDIO support
    phy: cygnus: pcie: Define DT binding
    phy: cygnus: pcie: Add Cygnus PCIe PHY support
    ARM: dts: enable PCIe PHY support for Cygnus

    .../bindings/phy/brcm,cygnus-pcie-phy.txt | 31 ++
    .../devicetree/bindings/phy/brcm,iproc-mdio.txt | 15 +
    arch/arm/boot/dts/bcm-cygnus.dtsi | 17 +
    drivers/phy/Kconfig | 27 ++
    drivers/phy/Makefile | 2 +
    drivers/phy/phy-cygnus-pcie.c | 340 ++++++++++++++++++++
    drivers/phy/phy-iproc-mdio.c | 249 ++++++++++++++
    include/linux/phy/iproc_mdio_phy.h | 22 ++
    8 files changed, 703 insertions(+)
    create mode 100644 Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt
    create mode 100644 Documentation/devicetree/bindings/phy/brcm,iproc-mdio.txt
    create mode 100644 drivers/phy/phy-cygnus-pcie.c
    create mode 100644 drivers/phy/phy-iproc-mdio.c
    create mode 100644 include/linux/phy/iproc_mdio_phy.h

    --
    1.7.9.5



    \
     
     \ /
      Last update: 2015-05-20 03:41    [W:4.847 / U:0.868 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site