lkml.org 
[lkml]   [2015]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RFC 4/7] ARM: dts: sun9i: Add PRCM device node for the A80 dtsi
On Sun, May 17, 2015 at 10:54 PM, Maxime Ripard
<maxime.ripard@free-electrons.com> wrote:
> On Thu, May 14, 2015 at 02:10:08PM +0800, Chen-Yu Tsai wrote:
>> The PRCM is a collection of clock controls, reset controls, and various
>> power switches/gates. Some of these can be independently listed and
>> supported, while a number of CPU related ones are used in tandem with
>> CPUCFG for SMP bringup and CPU hotplugging.
>>
>> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
>> ---
>> arch/arm/boot/dts/sun9i-a80.dtsi | 5 +++++
>> 1 file changed, 5 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
>> index c45735398f6a..1507bd2a88f0 100644
>> --- a/arch/arm/boot/dts/sun9i-a80.dtsi
>> +++ b/arch/arm/boot/dts/sun9i-a80.dtsi
>> @@ -797,6 +797,11 @@
>> interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
>> };
>>
>> + prcm@01700000 {
>> + compatible = "allwinner,sun9i-a80-prcm";
>> + reg = <0x08001400 0x200>;
>> + };
>> +
>
> The unit address doesn't match the content of the reg property.

Obvious copy-paste error (facepalm)

ChenYu


\
 
 \ /
  Last update: 2015-05-19 05:41    [W:0.054 / U:1.412 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site