Messages in this thread Patch in this message | | | From | Greg Kroah-Hartman <> | Subject | [PATCH 4.0 15/60] [media] marvell-ccic: fix YCbCr ordering | Date | Fri, 15 May 2015 16:14:16 -0700 |
| |
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans Verkuil <hans.verkuil@cisco.com>
commit 2a700d8edffdbfb8200332d96c3147e042b337f1 upstream.
Various formats had their byte ordering implemented incorrectly, and the V4L2_PIX_FMT_UYVY is actually impossible to create, instead you get V4L2_PIX_FMT_YVYU.
This was working before commit ad6ac452227b7cb93ac79beec092850d178740b1 ("add new formats support for marvell-ccic driver"). That commit broke the original format support and the OLPC XO-1 laptop showed wrong colors ever since (if you are crazy enough to attempt to run the latest kernel on it, like I did).
The email addresses of the authors of that patch are no longer valid, so without a way to reach them and ask them about their test setup I am going with what I can test on the OLPC laptop.
If this breaks something for someone on their non-OLPC setup, then contact the linux-media mailinglist. My suspicion however is that that commit went in untested.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
--- drivers/media/platform/marvell-ccic/mcam-core.c | 14 +++++++------- drivers/media/platform/marvell-ccic/mcam-core.h | 8 ++++---- 2 files changed, 11 insertions(+), 11 deletions(-)
--- a/drivers/media/platform/marvell-ccic/mcam-core.c +++ b/drivers/media/platform/marvell-ccic/mcam-core.c @@ -116,8 +116,8 @@ static struct mcam_format_struct { .planar = false, }, { - .desc = "UYVY 4:2:2", - .pixelformat = V4L2_PIX_FMT_UYVY, + .desc = "YVYU 4:2:2", + .pixelformat = V4L2_PIX_FMT_YVYU, .mbus_code = MEDIA_BUS_FMT_YUYV8_2X8, .bpp = 2, .planar = false, @@ -748,7 +748,7 @@ static void mcam_ctlr_image(struct mcam_ switch (fmt->pixelformat) { case V4L2_PIX_FMT_YUYV: - case V4L2_PIX_FMT_UYVY: + case V4L2_PIX_FMT_YVYU: widthy = fmt->width * 2; widthuv = 0; break; @@ -784,15 +784,15 @@ static void mcam_ctlr_image(struct mcam_ case V4L2_PIX_FMT_YUV420: case V4L2_PIX_FMT_YVU420: mcam_reg_write_mask(cam, REG_CTRL0, - C0_DF_YUV | C0_YUV_420PL | C0_YUVE_YVYU, C0_DF_MASK); + C0_DF_YUV | C0_YUV_420PL | C0_YUVE_VYUY, C0_DF_MASK); break; case V4L2_PIX_FMT_YUYV: mcam_reg_write_mask(cam, REG_CTRL0, - C0_DF_YUV | C0_YUV_PACKED | C0_YUVE_UYVY, C0_DF_MASK); + C0_DF_YUV | C0_YUV_PACKED | C0_YUVE_NOSWAP, C0_DF_MASK); break; - case V4L2_PIX_FMT_UYVY: + case V4L2_PIX_FMT_YVYU: mcam_reg_write_mask(cam, REG_CTRL0, - C0_DF_YUV | C0_YUV_PACKED | C0_YUVE_YUYV, C0_DF_MASK); + C0_DF_YUV | C0_YUV_PACKED | C0_YUVE_SWAP24, C0_DF_MASK); break; case V4L2_PIX_FMT_JPEG: mcam_reg_write_mask(cam, REG_CTRL0, --- a/drivers/media/platform/marvell-ccic/mcam-core.h +++ b/drivers/media/platform/marvell-ccic/mcam-core.h @@ -330,10 +330,10 @@ int mccic_resume(struct mcam_camera *cam #define C0_YUVE_YVYU 0x00010000 /* Y1CrY0Cb */ #define C0_YUVE_VYUY 0x00020000 /* CrY1CbY0 */ #define C0_YUVE_UYVY 0x00030000 /* CbY1CrY0 */ -#define C0_YUVE_XYUV 0x00000000 /* 420: .YUV */ -#define C0_YUVE_XYVU 0x00010000 /* 420: .YVU */ -#define C0_YUVE_XUVY 0x00020000 /* 420: .UVY */ -#define C0_YUVE_XVUY 0x00030000 /* 420: .VUY */ +#define C0_YUVE_NOSWAP 0x00000000 /* no bytes swapping */ +#define C0_YUVE_SWAP13 0x00010000 /* swap byte 1 and 3 */ +#define C0_YUVE_SWAP24 0x00020000 /* swap byte 2 and 4 */ +#define C0_YUVE_SWAP1324 0x00030000 /* swap bytes 1&3 and 2&4 */ /* Bayer bits 18,19 if needed */ #define C0_EOF_VSYNC 0x00400000 /* Generate EOF by VSYNC */ #define C0_VEDGE_CTRL 0x00800000 /* Detect falling edge of VSYNC */
| |