Messages in this thread | | | From | "Rafael J. Wysocki" <> | Subject | Re: [PATCH 1/2] cpufreq: arm_big_little: check if the frequency is set correctly | Date | Fri, 15 May 2015 02:20:36 +0200 |
| |
On Monday, April 27, 2015 03:56:18 PM Viresh Kumar wrote: > On 27 April 2015 at 15:21, Sudeep Holla <sudeep.holla@arm.com> wrote: > > The actual frequency is set through "clk_change_rate" which is void > > function. If the underlying hardware fails and returns error, the error > > is lost in the clk layer. In order to track such failures, we need to > > read back the frequency(just the cached value as clk_recalc called after > > clk->ops->set_rate gets the frequency) > > > > This patch adds check to see if the frequency is set correctly or if > > they were any hardware failures and sends the appropriate errors to the > > cpufreq core. > > > > Cc: Viresh Kumar <viresh.kumar@linaro.org> > > Reviewed-by: Michael Turquette <mike.turquette@linaro.org> > > Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> > > --- > > drivers/cpufreq/arm_big_little.c | 9 +++++++++ > > 1 file changed, 9 insertions(+) > > > > diff --git a/drivers/cpufreq/arm_big_little.c b/drivers/cpufreq/arm_big_little.c > > index e1a6ba66a7f5..f65e19f340d0 100644 > > --- a/drivers/cpufreq/arm_big_little.c > > +++ b/drivers/cpufreq/arm_big_little.c > > @@ -186,6 +186,15 @@ bL_cpufreq_set_rate(u32 cpu, u32 old_cluster, u32 new_cluster, u32 rate) > > mutex_unlock(&cluster_lock[old_cluster]); > > } > > > > + /* > > + * FIXME: clk_set_rate has to handle the case where clk_change_rate > > + * can fail due to hardware or firmware issues. Until the clk core > > + * layer is fixed, we can check here. In most of the cases we will > > + * be reading only the cached value anyway. This needs to be removed > > + * once clk core is fixed. > > + */ > > + if (bL_cpufreq_get_rate(cpu) != new_rate) > > + return -EIO; > > return 0; > > } > > Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Both queued up for 4.2, thanks!
-- I speak only for myself. Rafael J. Wysocki, Intel Open Source Technology Center.
| |