Messages in this thread | | | Date | Wed, 13 May 2015 13:21:28 +0100 | From | Lee Jones <> | Subject | Re: [RESEND PATCH v3 06/10] mfd: wm5110: Add register patch required for low power sleep |
| |
On Mon, 11 May 2015, Charles Keepax wrote:
> Some register settings must be applied before the first time low power > sleep mode is entered on the wm5110 to ensure optimium performance. > These settings require SYSCLK to be enabled whilst they are being > applied. This patch applies the settings using the recently factored out > boot time SYSCLK functionality. > > Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> > Acked-by: Lee Jones <lee.jones@linaro.org> > --- > drivers/mfd/arizona-core.c | 39 +++++++++++++++++++++++++++++++++++++++ > 1 files changed, 39 insertions(+), 0 deletions(-)
Applied, thanks.
> diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c > index b5a7e0e..c80ab79 100644 > --- a/drivers/mfd/arizona-core.c > +++ b/drivers/mfd/arizona-core.c > @@ -378,6 +378,35 @@ err: > return ret ?: err; > } > > +/* > + * Register patch to some of the CODECs internal write sequences > + * to ensure a clean exit from the low power sleep state. > + */ > +static const struct reg_default wm5110_sleep_patch[] = { > + { 0x337A, 0xC100 }, > + { 0x337B, 0x0041 }, > + { 0x3300, 0xA210 }, > + { 0x3301, 0x050C }, > +}; > + > +static int wm5110_apply_sleep_patch(struct arizona *arizona) > +{ > + struct arizona_sysclk_state state; > + int err, ret; > + > + ret = arizona_enable_freerun_sysclk(arizona, &state); > + if (ret) > + return ret; > + > + ret = regmap_multi_reg_write_bypassed(arizona->regmap, > + wm5110_sleep_patch, > + ARRAY_SIZE(wm5110_sleep_patch)); > + > + err = arizona_disable_freerun_sysclk(arizona, &state); > + > + return ret ?: err; > +} > + > static int wm5102_clear_write_sequencer(struct arizona *arizona) > { > int ret; > @@ -966,6 +995,16 @@ int arizona_dev_init(struct arizona *arizona) > goto err_reset; > } > break; > + case WM5110: > + case WM8280: > + ret = wm5110_apply_sleep_patch(arizona); > + if (ret) { > + dev_err(arizona->dev, > + "Failed to apply sleep patch: %d\n", > + ret); > + goto err_reset; > + } > + break; > default: > break; > }
-- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog
| |