lkml.org 
[lkml]   [2015]   [May]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v3 0/5] AHCI and SATA PHY support for Broadcom STB SoCs
    Date
    Few changes since v2, and the changes are *only* to the SATA driver, not to any
    of the DT bindings or the PHY driver. I'm resending the whole series for
    completeness.

    I'll list the changelog in each patch, but in summary:

    v2 -> v3:
    - straighten out endianness for big endian MIPS and ARM in AHCI driver
    - rename sata_brcmstb.c to ahci_brcmstb.c
    - bind ahci_brcmstb.c against the specific string, "brcm,bcm7445-ahci" instead
    of the generic one

    Brian

    Brian Norris (5):
    Documentation: devicetree: add Broadcom SATA binding
    Documentation: devicetree: add Broadcom SATA PHY binding
    ata: add Broadcom AHCI SATA3 driver for STB chips
    phy: add Broadcom SATA3 PHY driver for Broadcom STB SoCs
    ARM: dts: brcmstb: add nodes for SATA controller and PHY

    .../devicetree/bindings/ata/brcm,sata-brcmstb.txt | 35 +++
    .../bindings/phy/brcm,brcmstb-sata-phy.txt | 40 +++
    arch/arm/boot/dts/bcm7445.dtsi | 37 +++
    drivers/ata/Kconfig | 9 +
    drivers/ata/Makefile | 1 +
    drivers/ata/ahci_brcmstb.c | 322 +++++++++++++++++++++
    drivers/phy/Kconfig | 9 +
    drivers/phy/Makefile | 1 +
    drivers/phy/phy-brcmstb-sata.c | 216 ++++++++++++++
    9 files changed, 670 insertions(+)
    create mode 100644 Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt
    create mode 100644 Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt
    create mode 100644 drivers/ata/ahci_brcmstb.c
    create mode 100644 drivers/phy/phy-brcmstb-sata.c

    --
    1.9.1



    \
     
     \ /
      Last update: 2015-05-13 01:41    [W:4.033 / U:0.136 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site