Messages in this thread Patch in this message | | | From | Lee Jones <> | Subject | [PATCH 04/13] ARM: STi: STiH416-b2020e: Enable PWM on the B2020 Rev-E | Date | Tue, 12 May 2015 13:51:41 +0100 |
| |
All the infrastructure is now in place for ST's PWM controller. This patch takes the final step and enables the IP on the 2020 Rev-E development platform.
Signed-off-by: Ajit Pal Singh <ajitpal.singh@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> --- arch/arm/boot/dts/stih416-b2020e.dts | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/stih416-b2020e.dts b/arch/arm/boot/dts/stih416-b2020e.dts index 961799e..f1ceee1 100644 --- a/arch/arm/boot/dts/stih416-b2020e.dts +++ b/arch/arm/boot/dts/stih416-b2020e.dts @@ -51,5 +51,15 @@ sata0: sata@fe380000{ status = "okay"; }; + + /* SAS PWM Module */ + pwm0: pwm@fed10000 { + status = "okay"; + }; + + /* SBC PWM Module */ + pwm1: pwm@fe510000 { + status = "okay"; + }; }; }; -- 1.9.1
| |