lkml.org 
[lkml]   [2015]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 6/6] phy: twl4030-usb: add extcon to report cable connections.
+extcon MAINTAINERS

Hi,

On Thursday 16 April 2015 01:33 PM, NeilBrown wrote:
> From: NeilBrown <neilb@suse.de>

commit msg pls.
>
> Signed-off-by: NeilBrown <neilb@suse.de>
> ---
> drivers/phy/phy-twl4030-usb.c | 67 +++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 67 insertions(+)
>
> diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c
> index 1d6f3e70193e..c42153d43ec2 100644
> --- a/drivers/phy/phy-twl4030-usb.c
> +++ b/drivers/phy/phy-twl4030-usb.c
> @@ -40,6 +40,7 @@
> #include <linux/regulator/consumer.h>
> #include <linux/err.h>
> #include <linux/slab.h>
> +#include <linux/extcon.h>
>
> /* Register defines */
>
> @@ -173,6 +174,9 @@ struct twl4030_usb {
> enum omap_musb_vbus_id_status linkstat;
> bool vbus_supplied;
>
> + /* cable connection */
> + struct extcon_dev edev;
> +
> struct delayed_work id_workaround_work;
> };
>
> @@ -592,6 +596,54 @@ static ssize_t twl4030_usb_id_show(struct device *dev,
> }
> static DEVICE_ATTR(id, 0444, twl4030_usb_id_show, NULL);
>
> +static const char *usb_cables[] = {
> + "USB", /* id is floating */
> + "Charger-downstream", /* id is floating and D+ shorted to D- */
> + "USB-Host", /* id is ground */
> + "USB-ACA", /* "Accessory Charger Adapter" id is something else */
> + NULL
> +};
> +enum {
> + TWL_CABLE_USB,
> + TWL_CABLE_CHARGER, /* Not used - twl4030 can detect charger,
> + * but driver cannot yet */
> + TWL_CABLE_OTG,
> + TWL_CABLE_ACA,
> +};
> +static u32 all_exclusive[] = {0xFFFFFFFF, 0};
> +
> +static void twl4030_usb_report_cable(struct twl4030_usb *twl)
> +{
> + enum twl4030_id_status sts;
> +
> + if (!cable_present(twl->linkstat)) {
> + extcon_set_state(&twl->edev, 0);
> + return;
> + }
> +
> + sts = twl4030_get_id(twl);
> +
> + switch (sts) {
> + case TWL4030_FLOATING: /* USB downstream */
> + extcon_update_state(&twl->edev,
> + 1<<TWL_CABLE_USB,
> + 1<<TWL_CABLE_USB);
> + break;
> + case TWL4030_GROUND: /* USB host */
> + extcon_update_state(&twl->edev,
> + 1<<TWL_CABLE_OTG,
> + 1<<TWL_CABLE_OTG);
> + break;
> + default: /* Some resistor */
> + extcon_update_state(&twl->edev,
> + 1<<TWL_CABLE_ACA,
> + 1<<TWL_CABLE_ACA);
> + /* An ACA should set port to 'host' mode */
> + twl->linkstat = OMAP_MUSB_ID_GROUND;
> + break;
> + }
> +}
> +
> static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
> {
> struct twl4030_usb *twl = _twl;
> @@ -628,6 +680,7 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
> pm_runtime_put_autosuspend(twl->dev);
> }
> omap_musb_mailbox(status);
> + twl4030_usb_report_cable(twl);
> }
>
> /* don't schedule during sleep - irq works right then */
> @@ -766,6 +819,20 @@ static int twl4030_usb_probe(struct platform_device *pdev)
> }
> usb_add_phy_dev(&twl->phy);
>
> + twl->edev.name = devm_kasprintf(twl->dev, GFP_KERNEL, "%s-usb",
> + dev_name(twl->dev->parent));
> + twl->edev.supported_cable = usb_cables;
> + twl->edev.mutually_exclusive = all_exclusive;
> + twl->edev.print_name = NULL; /* why would you change this? */
> + twl->edev.print_state = NULL; /* probably want to change this */

Not sure about those two callbacks. Chanwoo?

Thanks
Kishon


\
 
 \ /
  Last update: 2015-05-11 16:01    [W:0.139 / U:2.956 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site