lkml.org 
[lkml]   [2015]   [Apr]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] tty: serial: msm: Fix mask value of RFR level
On 04/07/15 06:47, Pramod Gurav wrote:
> According to documents The RFR_LEVEL1 in UART_DM_MR1 can be

That is UART_DM_MR1

> programmed in bits 31:8 but the masks only bits 17:8.
> Correct the same.
>
> Signed-off-by: Pramod Gurav <gpramod@codeaurora.org>
> ---
> drivers/tty/serial/msm_serial.h | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/tty/serial/msm_serial.h b/drivers/tty/serial/msm_serial.h
> index 8f7806d..5ff9ebf 100644
> --- a/drivers/tty/serial/msm_serial.h
> +++ b/drivers/tty/serial/msm_serial.h
> @@ -19,7 +19,7 @@
> #define UART_MR1 0x0000
>
> #define UART_MR1_AUTO_RFR_LEVEL0 0x3F
> -#define UART_MR1_AUTO_RFR_LEVEL1 0x3FF00
> +#define UART_MR1_AUTO_RFR_LEVEL1 0xFFFFFF00

But this is UART_MR1. The two hardware cores share the same driver
because the DM hardware is based on the non-DM hardware. I suppose we
need to make another #define UART_DM_MR1_AUTO_RFR_LEVEL1 and then have
an if (msm_port->is_uartdm) in msm_startup() path to handle the
differences here.

> #define UART_MR1_RX_RDY_CTL (1 << 7)
> #define UART_MR1_CTS_CTL (1 << 6)
>


--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project



\
 
 \ /
  Last update: 2015-04-08 01:41    [W:0.023 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site