Messages in this thread | | | Date | Tue, 7 Apr 2015 21:45:01 +0200 | From | Boris Brezillon <> | Subject | Re: [PATCH] ARM: at91/dt: add support for kizbox2. |
| |
On Tue, 7 Apr 2015 16:13:51 +0200 Gaël PORTAY <g.portay@overkiz.com> wrote:
> Add DT file for Kizbox 2 board. > This board is based on Atmel's SAMA5D31 Cortex-A5 SoC. > > Signed-off-by: Gaël PORTAY <g.portay@overkiz.com> > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/at91-kizbox2.dts | 223 +++++++++++++++++++++++++++++++++++++ > 2 files changed, 224 insertions(+) > create mode 100644 arch/arm/boot/dts/at91-kizbox2.dts >
[...]
> +/dts-v1/; > +#include "sama5d31.dtsi" > +#include "sama5d3_emac.dtsi" > +#include <dt-bindings/pwm/pwm.h> > + > +/ { > + model = "Overkiz Kizbox 2"; > + compatible = "overkiz,kizbox2", "atmel,sama5d31ek", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
Oh, and as Alexandre noticed in your other patch series, you should just define:
compatible = "overkiz,kizbox2", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
-- Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com
| |