lkml.org 
[lkml]   [2015]   [Apr]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] x86: Fix earlyprintk ttyS2/3
On Tue, Apr 7, 2015 at 10:39 PM, Joe Perches <joe@perches.com> wrote:
> On Tue, 2015-04-07 at 22:29 +0800, Daniel J Blueman wrote:
>> Quite a few platforms use ttyS2 for their serial-over-LAN, so fix
>> early
>> printk support for ttyS2 and 3, avoiding the need to hard-code the
>> IO port.
> []
>> diff --git a/arch/x86/boot/early_serial_console.c
>> b/arch/x86/boot/early_serial_console.c
> []
>> @@ -71,15 +71,16 @@ static void parse_earlyprintk(void)
>> else
>> pos = e - arg;
>> } else if (!strncmp(arg + pos, "ttyS", 4)) {
>> - static const int bases[] = { 0x3f8, 0x2f8 };
>> - int idx = 0;
>> + static const int bases[] = {0x3f8, 0x2f8, 0x3e8, 0x2e8};
>> + unsigned idx = 0;
>>
>> if (!strncmp(arg + pos, "ttyS", 4))
>> pos += 4;
>>
>> - if (arg[pos++] == '1')
>> - idx = 1;
>> + if ((arg[pos] - '0') < (sizeof(bases) / sizeof(bases[0])))
>> + idx = arg[pos] - '0';
>
> This doesn't prevent negative indexing in case someone
> does something like shift key typo "ttyS!" for "ttyS1".
>
> I've done that.

Gah; late night coding syndrome. Adding the missing cast in the first
case only:

Subject: [PATCH v2] x86: Fix earlyprintk ttyS2/3

Quite a few platforms use ttyS2 for their serial-over-LAN, so fix early
printk support for ttyS2 and 3, avoiding the need to hard-code the IO
port.

v2: Add missing unsigned cast to correct range check

Signed-off-by: Daniel J Blueman <daniel@numascale.com>
---
arch/x86/boot/early_serial_console.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/x86/boot/early_serial_console.c
b/arch/x86/boot/early_serial_console.c
index 5df2869..3d7f112 100644
--- a/arch/x86/boot/early_serial_console.c
+++ b/arch/x86/boot/early_serial_console.c
@@ -71,15 +71,16 @@ static void parse_earlyprintk(void)
else
pos = e - arg;
} else if (!strncmp(arg + pos, "ttyS", 4)) {
- static const int bases[] = { 0x3f8, 0x2f8 };
+ static const int bases[] = {0x3f8, 0x2f8, 0x3e8, 0x2e8};
int idx = 0;

if (!strncmp(arg + pos, "ttyS", 4))
pos += 4;

- if (arg[pos++] == '1')
- idx = 1;
+ if ((unsigned)(arg[pos] - '0') < (sizeof(bases) / sizeof(bases[0])))
+ idx = arg[pos] - '0';

+ pos++;
port = bases[idx];
}

--


\
 
 \ /
  Last update: 2015-04-07 17:41    [W:0.032 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site