lkml.org 
[lkml]   [2015]   [Apr]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] mailbox: add ACPI support for mailbox framework
Date
On Tuesday, April 07, 2015 11:41:43 AM Mika Westerberg wrote:
> On Thu, Apr 02, 2015 at 11:04:24AM -0700, Feng Kan wrote:
> > On Thu, Apr 2, 2015 at 2:07 AM, Mika Westerberg
> > <mika.westerberg@linux.intel.com> wrote:
> > > On Wed, Apr 01, 2015 at 10:01:45AM -0700, Feng Kan wrote:
> > >> On Wed, Apr 1, 2015 at 12:45 AM, Mika Westerberg
> > >> <mika.westerberg@linux.intel.com> wrote:
> > >> > On Tue, Mar 31, 2015 at 02:18:00PM -0700, Feng Kan wrote:
> > >> >> This will add support for ACPI parsing of the mboxes attribute
> > >> >> when booting with ACPI table. The client will have a attribute
> > >> >> mimic the dts call "mboxes". In the ACPI case, the client will
> > >> >> mark "mboxes" with the ACPI HID of the mbox it wishes to use.
> > >> >>
> > >> >> Name (_DSD, Package () {
> > >> >> ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
> > >> >> Package () {
> > >> >> Package (2) {"mboxes", "ACPIHID"},
> > >> >> }
> > >> >> })
> > >> >
> > >> > Instead of this, why not match against the DT compatible property?
> > >> >
> > >> > Name (_HID, "PRP0001")
> > >> >
> > >> > Name (_DSD, Package () {
> > >> > ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
> > >> > Package () {
> > >> > Package (2) {"compatible", "your-dt-compatible-string"},
> > >> > }
> > >> > })
> > >> I think my description was not clear enough. The _DSD section is not
> > >> meant to identify the mailbox driver, but used by the acpi node that will
> > >> request the mailbox channel. The dts version would be as below.
> > >>
> > >> mailbox: {
> > >> }
> > >>
> > >> user-mbox: {
> > >> mboxes: <&mailbox 0>
> > >> }
> > >>
> > >> The mboxes attribute in the user of the mbox has to specify the HID of the
> > >> mbox in order to retrieve channel pointer.
> > >
> > > Okay, then I think you can use reference instead of _HID, like
> > >
> > > // The mailbox device
> > > Device (MLBX) {
> > > }
> > >
> > > // User-mbox device
> > > Device (USBX) {
> > > Name (_DSD, Package () {
> > > ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
> > > Package () {
> > > Package () {"mboxes", Package () {^^MLBX, 0}}),
> > > }
> > > })
> > > }
> >
> > Thanks, will try this. A side question on your previous reply. Would you
> > prefer a new driver using the PRP0001 or an actual proper HID.
>
> If you have existing DT bindings for this, then PRP0001 is fine.
> Otherwise you should use the proper _HID for this particular device.

To be precise, PRP0001 specifically means "Use the 'compatible' property
to find the driver for this device", so if *that* is what you want to do,
you can use PRP0001 as the _HID. For Windows (and such) compatibility, you
can provide a _CID whith a (list of) proper device ID(s) in addition to that.


--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.


\
 
 \ /
  Last update: 2015-04-07 13:41    [W:0.055 / U:0.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site