lkml.org 
[lkml]   [2015]   [Apr]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3.13.y-ckt 067/156] bnx2x: Force fundamental reset for EEH recovery
Date
3.13.11-ckt19 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Brian King <brking@linux.vnet.ibm.com>

commit da293700568ed3d96fcf062ac15d7d7c41377f11 upstream.

EEH recovery for bnx2x based adapters is not reliable on all Power
systems using the default hot reset, which can result in an
unrecoverable EEH error. Forcing the use of fundamental reset
during EEH recovery fixes this.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 71d3f0c..9225cc1 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -12262,6 +12262,10 @@ static int bnx2x_init_dev(struct bnx2x *bp, struct pci_dev *pdev,
/* clean indirect addresses */
pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS,
PCICFG_VENDOR_ID_OFFSET);
+
+ /* Set PCIe reset type to fundamental for EEH recovery */
+ pdev->needs_freset = 1;
+
/*
* Clean the following indirect addresses for all functions since it
* is not used by the driver.
--
1.9.1


\
 
 \ /
  Last update: 2015-04-08 02:01    [W:0.355 / U:0.860 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site