lkml.org 
[lkml]   [2015]   [Apr]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4] earlycon: 8250: Fix command line regression
On 04/05/2015 03:09 AM, Yinghai Lu wrote:
> On Sat, Apr 4, 2015 at 10:19 AM, Peter Hurley <peter@hurleysoftware.com> wrote:
> ...
>> Documentation/kernel-parameters.txt | 18 +++++++++++++++---
>> drivers/tty/serial/8250/8250_core.c | 37 +++++++++++++++++++++++++++++++++---
>> drivers/tty/serial/8250/8250_early.c | 19 ------------------
>> 3 files changed, 49 insertions(+), 25 deletions(-)
>>
>> diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
>> index bfcb1a6..1facf0b 100644
>> --- a/Documentation/kernel-parameters.txt
>> +++ b/Documentation/kernel-parameters.txt
>> @@ -713,10 +713,18 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
>>
>> uart[8250],io,<addr>[,options]
>> uart[8250],mmio,<addr>[,options]
>> + uart[8250],mmio32,<addr>[,options]
>> + uart[8250],0x<addr>[,options]
>
> put this to other patch please.
>
>> Start an early, polled-mode console on the 8250/16550
>> UART at the specified I/O port or MMIO address,
>> - switching to the matching ttyS device later. The
>> - options are the same as for ttyS, above.
>> + switching to the matching ttyS device later.
>> + MMIO inter-register address stride is either 8-bit
>> + (mmio) or 32-bit (mmio32).
>> + If none of [io|mmio|mmio32], <addr> is assumed to be
>> + equivalent to 'mmio'. 'options' are specified in the
>> + same format described for ttyS above; if unspecified,
>> + the h/w is not re-initialized.
>> +
>> hvc<n> Use the hypervisor console device <n>. This is for
>> both Xen and PowerPC hypervisors.
>>
>> @@ -944,11 +952,15 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
>> uart[8250],io,<addr>[,options]
>> uart[8250],mmio,<addr>[,options]
>> uart[8250],mmio32,<addr>[,options]
>> + uart[8250],0x<addr>[,options]
>
> and this to another patch please.
>
>> Start an early, polled-mode console on the 8250/16550
>> UART at the specified I/O port or MMIO address.
>> MMIO inter-register address stride is either 8-bit
>> (mmio) or 32-bit (mmio32).
>> - The options are the same as for ttyS, above.
>> + If none of [io|mmio|mmio32], <addr> is assumed to be
>> + equivalent to 'mmio'. 'options' are specified in the
>> + same format described for "console=ttyS<n>"; if
>> + unspecified, the h/w is not initialized.
>>
>> pl011,<addr>
>> Start an early, polled-mode console on a pl011 serial
>> diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
>> index e0fb5f0..456606f 100644
>> --- a/drivers/tty/serial/8250/8250_core.c
>> +++ b/drivers/tty/serial/8250/8250_core.c
>> @@ -3447,6 +3447,21 @@ static int univ8250_console_setup(struct console *co, char *options)
>> return serial8250_console_setup(up, options);
>> }
>>
>> +static unsigned int probe_baud(struct uart_port *port)
>> +{
>> + unsigned char lcr, dll, dlm;
>> + unsigned int quot;
>> +
>> + lcr = serial_port_in(port, UART_LCR);
>> + serial_port_out(port, UART_LCR, lcr | UART_LCR_DLAB);
>> + dll = serial_port_in(port, UART_DLL);
>> + dlm = serial_port_in(port, UART_DLM);
>> + serial_port_out(port, UART_LCR, lcr);
>> +
>> + quot = (dlm << 8) | dll;
>> + return (port->uartclk / 16) / quot;
>> +}
>> +
>
> You said some "newer" chips do not support probe baud. why do you move
> code to core ?

There's no functional difference, but here it's at least possible
to add support for exar, synopsys, ti omap, intel, etc. based on either
port type or a function vector initialized by the sub-driver.


> I was thinking some embedded guys could comment out 8280_early.c, now you get
> extra work for them to comment out code from 8250_core.c.

Huh? That's just ridiculous.


>> /**
>> * univ8250_console_match - non-standard console matching
>> * @co: registering console
>> @@ -3455,13 +3470,18 @@ static int univ8250_console_setup(struct console *co, char *options)
>> * @options: ptr to option string from console command line
>> *
>> * Only attempts to match console command lines of the form:
>> - * console=uart<>,io|mmio|mmio32,<addr>,<options>
>> - * console=uart<>,<addr>,options
>> + * console=uart[8250],io|mmio|mmio32,<addr>[,<options>]
>> + * console=uart[8250],0x<addr>[,<options>]
>> * This form is used to register an initial earlycon boot console and
>> * replace it with the serial8250_console at 8250 driver init.
>> *
>> * Performs console setup for a match (as required by interface)
>> *
>> + * ** HACK ALERT **
>
> That is not HACK original.
>
> but your fix make it to be hack.
>
>> + * If no <options> are specified, then assume the h/w is already setup.
>> + * This was the undocumented behavior of the original implementation so
>> + * it is cast in stone forever.
>> + *
>> * Returns 0 if console matches; otherwise non-zero to use default matching
>> */
>> static int univ8250_console_match(struct console *co, char *name, int idx,
>> @@ -3475,12 +3495,16 @@ static int univ8250_console_match(struct console *co, char *name, int idx,
>> if (strncmp(name, match, 4) != 0)
>> return -ENODEV;
>>
>> + if (idx && idx != 8250)
>> + return -ENODEV;
>> +
>
> Your fix is getting ugly now.

This is required anyway. I'm not the one that decided it would be
cute to have "uart" and "uart8250" mean the same thing.


>> if (uart_parse_earlycon(options, &iotype, &addr, &options))
>> return -ENODEV;
>>
>> /* try to match the port specified on the command line */
>> for (i = 0; i < nr_uarts; i++) {
>> struct uart_port *port = &serial8250_ports[i].port;
>> + int baud, bits = 8, parity = 'n', flow = 'n';
>>
>> if (port->iotype != iotype)
>> continue;
>> @@ -3490,8 +3514,15 @@ static int univ8250_console_match(struct console *co, char *name, int idx,
>> if (iotype == UPIO_PORT && port->iobase != addr)
>> continue;
>>
>> + /* link port to console */
>> co->index = i;
>> - return univ8250_console_setup(co, options);
>> + port->cons = co;
>> +
>> + if (options && *options)
>> + uart_parse_options(options, &baud, &parity, &bits, &flow);
>> + else
>> + baud = probe_baud(port);
>> + return uart_set_options(port, port->cons, baud, parity, bits, flow);
>
> what a mess.

This was the mess:

> diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
>
> -static int serial8250_console_early_setup(void)
> -{
> - return serial8250_find_port_for_earlycon();
> -}
>
> @@ -3347,7 +3392,7 @@ static struct console serial8250_console = {
> .write = serial8250_console_write,
> .device = uart_console_device,
> .setup = serial8250_console_setup,
> - .early_setup = serial8250_console_early_setup,
> .flags = CON_PRINTBUFFER | CON_ANYTIME,
> .index = -1,
> .data = &serial8250_reg,
> @@ -3361,19 +3406,6 @@ static int __init serial8250_console_init(void)
>
> -int serial8250_find_port(struct uart_port *p)
> -{
> - int line;
> - struct uart_port *port;
> -
> - for (line = 0; line < nr_uarts; line++) {
> - port = &serial8250_ports[line].port;
> - if (uart_match_port(p, port))
> - return line;
> - }
> - return -ENODEV;
> -}
> -
>
> diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
>
> -
> -int serial8250_find_port_for_earlycon(void)
> -{
> - struct earlycon_device *device = early_device;
> - struct uart_port *port = device ? &device->port : NULL;
> - int line;
> - int ret;
> -
> - if (!port || (!port->membase && !port->iobase))
> - return -ENODEV;
> -
> - line = serial8250_find_port(port);
> - if (line < 0)
> - return -ENODEV;
> -
> - ret = update_console_cmdline("uart", 8250,
> - "ttyS", line, device->options);
> - if (ret < 0)
> - ret = update_console_cmdline("uart", 0,
> - "ttyS", line, device->options);
> -
> - return ret;
> -}
>
> diff --git a/include/linux/console.h b/include/linux/console.h
>
> -extern int update_console_cmdline(char *name, int idx, char *name_new, int idx_new, char *options);
>
> diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
>
> -extern int serial8250_find_port(struct uart_port *p);
> -extern int serial8250_find_port_for_earlycon(void);
>
> diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
>
> -int update_console_cmdline(char *name, int idx, char *name_new, int idx_new, char *options)
> -{
> - struct console_cmdline *c;
> - int i;
> -
> - for (i = 0, c = console_cmdline;
> - i < MAX_CMDLINECONSOLES && c->name[0];
> - i++, c++)
> - if (strcmp(c->name, name) == 0 && c->index == idx) {
> - strlcpy(c->name, name_new, sizeof(c->name));
> - c->options = options;
> - c->index = idx_new;
> - return i;
> - }
> - /* not found */
> - return -1;
> -}
> -
>
> @@ -2436,9 +2418,6 @@ void register_console(struct console *newcon)
>
> - if (newcon->early_setup)
> - newcon->early_setup();
> -


> Now sure if it is safe to move down probe_baud, when serial port is still used.
>
>> }
>>
>> return -ENODEV;
>> diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
>> index e95ebfe..8e11968 100644
>> --- a/drivers/tty/serial/8250/8250_early.c
>> +++ b/drivers/tty/serial/8250/8250_early.c
>> @@ -105,21 +105,6 @@ static void __init early_serial8250_write(struct console *console,
>> serial8250_early_out(port, UART_IER, ier);
>> }
>>
>> -static unsigned int __init probe_baud(struct uart_port *port)
>> -{
>> - unsigned char lcr, dll, dlm;
>> - unsigned int quot;
>> -
>> - lcr = serial8250_early_in(port, UART_LCR);
>> - serial8250_early_out(port, UART_LCR, lcr | UART_LCR_DLAB);
>> - dll = serial8250_early_in(port, UART_DLL);
>> - dlm = serial8250_early_in(port, UART_DLM);
>> - serial8250_early_out(port, UART_LCR, lcr);
>> -
>> - quot = (dlm << 8) | dll;
>> - return (port->uartclk / 16) / quot;
>> -}
>> -
>> static void __init init_port(struct earlycon_device *device)
>> {
>> struct uart_port *port = &device->port;
>> @@ -151,10 +136,6 @@ static int __init early_serial8250_setup(struct earlycon_device *device,
>> struct uart_port *port = &device->port;
>> unsigned int ier;
>>
>> - device->baud = probe_baud(&device->port);
>> - snprintf(device->options, sizeof(device->options), "%u",
>> - device->baud);
>> -
>> /* assume the device was initialized, only mask interrupts */
>> ier = serial8250_early_in(port, UART_IER);
>> serial8250_early_out(port, UART_IER, ier & UART_IER_UUE);
>> --
>
> Greg, Please consider apply my fix as attached, it is much cleaner.

On what planet is 27 loc across 4 source files cleaner than
6 loc that might be reducible to 2?



\
 
 \ /
  Last update: 2015-04-05 15:21    [W:0.123 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site