lkml.org 
[lkml]   [2015]   [Apr]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V3 1/3] watchdog: imgpdc: Allow timeout to be set in device-tree
On 04/03/2015 10:05 AM, Andrew Bresticker wrote:
> Since the heartbeat is statically initialized to its default value,
> watchdog_init_timeout() will never look in the device-tree for a
> timeout-sec value. Instead of statically initializing heartbeat,
> fall back to the default timeout value if watchdog_init_timeout()
> fails.
>
> Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
> Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
> Cc: James Hogan <james.hogan@imgtec.com>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
> Changes from v2:
> - Set timeout before calling watchdog_init_timeout
> - Don't print an error on watchdog_init_timeout failure
> New for v2.
> ---
> drivers/watchdog/imgpdc_wdt.c | 10 +++-------
> 1 file changed, 3 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/watchdog/imgpdc_wdt.c b/drivers/watchdog/imgpdc_wdt.c
> index 0deaa4f..d6826a6 100644
> --- a/drivers/watchdog/imgpdc_wdt.c
> +++ b/drivers/watchdog/imgpdc_wdt.c
> @@ -42,7 +42,7 @@
> #define PDC_WDT_MIN_TIMEOUT 1
> #define PDC_WDT_DEF_TIMEOUT 64
>
> -static int heartbeat = PDC_WDT_DEF_TIMEOUT;
> +static int heartbeat;
> module_param(heartbeat, int, 0);
> MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds "
> "(default=" __MODULE_STRING(PDC_WDT_DEF_TIMEOUT) ")");
> @@ -190,15 +190,11 @@ static int pdc_wdt_probe(struct platform_device *pdev)
> pdc_wdt->wdt_dev.info = &pdc_wdt_info;
> pdc_wdt->wdt_dev.ops = &pdc_wdt_ops;
> pdc_wdt->wdt_dev.max_timeout = 1 << PDC_WDT_CONFIG_DELAY_MASK;
> + pdc_wdt->wdt_dev.timeout = PDC_WDT_DEF_TIMEOUT;
> pdc_wdt->wdt_dev.parent = &pdev->dev;
> watchdog_set_drvdata(&pdc_wdt->wdt_dev, pdc_wdt);
>
> - ret = watchdog_init_timeout(&pdc_wdt->wdt_dev, heartbeat, &pdev->dev);
> - if (ret < 0) {
> - pdc_wdt->wdt_dev.timeout = pdc_wdt->wdt_dev.max_timeout;
> - dev_warn(&pdev->dev,
> - "Initial timeout out of range! setting max timeout\n");
> - }
> + watchdog_init_timeout(&pdc_wdt->wdt_dev, heartbeat, &pdev->dev);
>
> pdc_wdt_stop(&pdc_wdt->wdt_dev);
>
>



\
 
 \ /
  Last update: 2015-04-05 15:21    [W:0.303 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site