Messages in this thread | | | Date | Thu, 30 Apr 2015 12:36:59 -0500 | From | Ben Shelton <> | Subject | Re: [PATCH] mtd: Introduce CONFIG_MTD_RESERVE_END |
| |
Hi Brian,
On 04/29, Brian Norris wrote: > > + This can be useful if, for example, the BBT is stored at the end > > + of the flash, and you don't want those blocks counted as part of > > + the last MTD partition. > > And why is that a problem? We don't add Kconfig options just because you > "don't want" something.
It's not a "problem" per se, but it does cause the calculated/displayed number of bad PEBs to be greater than it actually is. In older kernel versions, this used to cause a warning on mount that it could not reserve enough PEBs, but this no longer occurs.
Without the patch and config setting:
UBI: attached mtd3 (name "root", size 942 MiB) to ubi1 UBI: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 512 UBI: VID header offset: 512 (aligned 512), data offset: 2048 UBI: good PEBs: 7539, bad PEBs: 4, corrupted PEBs: 0 UBI: user volume: 1, internal volumes: 1, max. volumes count: 128 UBI: max/mean erase counter: 549/79, WL threshold: 4096, image sequence number: 0 UBI: available PEBs: 4, total reserved PEBs: 7535, PEBs reserved for bad PEB handling: 156
With the patch and config setting:
UBI: attached mtd3 (name "root", size 942 MiB) to ubi1 UBI: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 512 UBI: VID header offset: 512 (aligned 512), data offset: 2048 UBI: good PEBs: 7539, bad PEBs: 0, corrupted PEBs: 0 UBI: user volume: 1, internal volumes: 1, max. volumes count: 128 UBI: max/mean erase counter: 549/79, WL threshold: 4096, image sequence number: 0 UBI: available PEBs: 0, total reserved PEBs: 7539, PEBs reserved for bad PEB handling: 160
The reason for doing this as a Kconfig option rather than with an additional partition is that we use the same .itb boot image (and kernel arguments) for a series of embedded controllers that have different NAND flash sizes, and we use the '-' command line parameter to give the root partition all the available space after the other partitions.
Thanks, Ben
| |