lkml.org 
[lkml]   [2015]   [Apr]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 10/10] mfd: wm5110: Add delay before releasing reset line
On Thu, 30 Apr 2015, Charles Keepax wrote:

> On the wm5110 it is important the reset line is held for slightly longer
> to ensure the device starts up well. This patch adds a 5mS delay for
> this.
>
> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
> ---
> drivers/mfd/arizona-core.c | 10 ++++++++++
> 1 files changed, 10 insertions(+), 0 deletions(-)

Acked-by: Lee Jones <lee.jones@linaro.org>

> diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
> index f1ff68a..93e4d94 100644
> --- a/drivers/mfd/arizona-core.c
> +++ b/drivers/mfd/arizona-core.c
> @@ -259,6 +259,16 @@ static inline void arizona_enable_reset(struct arizona *arizona)
> static void arizona_disable_reset(struct arizona *arizona)
> {
> if (arizona->pdata.reset) {
> + switch (arizona->type) {
> + case WM5110:
> + case WM8280:
> + /* Meet requirements for minimum reset duration */
> + msleep(5);
> + break;
> + default:
> + break;
> + }
> +
> gpio_set_value_cansleep(arizona->pdata.reset, 1);
> msleep(1);
> }

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog


\
 
 \ /
  Last update: 2015-04-30 12:21    [W:0.050 / U:1.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site