lkml.org 
[lkml]   [2015]   [Apr]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v7 0/9] mfd: watchdog: rtc: New driver for ST's LPC IP
On 04/29/2015 06:21 AM, Lee Jones wrote:
>> [Alessandro: This just needs RTC Acks now]
>
> Given this patch-set has been on the list for some time now and we
> haven't heard from Alessandro in all that time, I'm going to just
> apply the set and send out a pull-request to the other Maintainers.
>
> No point waiting any longer IMHO.
>

+1

Guenter

>> ST's Low Power Controller (LPC) controls two devices; watchdog and RTC.
>> Only one of the devices can be used at any one time, which is enforced
>> by the Device Driver model.
>>
>> This driver set provides everything you need to choose one (and only
>> one) of the LPC devices to run per I/P block, of which there are two
>> on the enabled STiH407 h/w.
>>
>> Version 7:
>> - Fix 2 legacy typos in the binding documentation compatible string
>> examples.
>>
>> Version 6:
>> - RTC: GPL v2 => GPL to reflect the information in the header
>> - Applied another Reviewed-by from Guenter
>>
>> Version 5:
>> - Disable WDT clock over suspend
>> - WDT: GPL v2 => GPL to reflect the information in the header
>> - Change module name in Kconfig help and file header
>>
>> Version 4:
>> - Use {readl,writel}_relaxed() calls
>> - Add Guenter's Reviewed-by
>> - Rebased onto v4.0-rc1
>>
>> Version 3:
>> - Move Regmap pointer into core device data structure
>> - Remove error message from devm_ioremap_resource
>>
>> Version 2:
>> - Only calculate keepalive once in probe()
>> - Check for a 0 clk_rate
>> - Set limits using predefined attributes from watchdog_device
>> - CONFIG_PM => CONFIG_SLEEP
>> - Call st_wdog_setup() on resume
>> - Remove MFD driver -- instead rely on driver probing mechanism
>> which continues attempting to bind to different drivers until
>> one does not return -ENODEV
>>
>> Lee Jones (9):
>> mfd: dt-bindings: Provide human readable defines for LPC mode choosing
>> ARM: multi_v7_defconfig: Enable support for ST's LPC Watchdog
>> ARM: multi_v7_defconfig: Enable support for ST's LPC RTC
>> ARM: STi: DT: STiH407: Add Device Tree node for the LPC
>> watchdog: bindings: Provide ST bindings for ST's LPC Watchdog device
>> watchdog: st_wdt: Add new driver for ST's LPC Watchdog
>> rtc: bindings: Provide ST bindings for ST's LPC RTC device
>> rtc: st: add new driver for ST's LPC RTC
>> MAINTAINERS: Add Watchdog and RTC files to STI's maintainer entry
>>
>> .../devicetree/bindings/rtc/rtc-st-lpc.txt | 25 ++
>> .../devicetree/bindings/watchdog/st_lpc_wdt.txt | 38 +++
>> MAINTAINERS | 2 +
>> arch/arm/boot/dts/stih407-family.dtsi | 20 ++
>> arch/arm/configs/multi_v7_defconfig | 2 +
>> drivers/rtc/Kconfig | 12 +
>> drivers/rtc/Makefile | 1 +
>> drivers/rtc/rtc-st-lpc.c | 354 +++++++++++++++++++++
>> drivers/watchdog/Kconfig | 13 +
>> drivers/watchdog/Makefile | 1 +
>> drivers/watchdog/st_lpc_wdt.c | 344 ++++++++++++++++++++
>> include/dt-bindings/mfd/st-lpc.h | 15 +
>> 12 files changed, 827 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/rtc/rtc-st-lpc.txt
>> create mode 100644 Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt
>> create mode 100644 drivers/rtc/rtc-st-lpc.c
>> create mode 100644 drivers/watchdog/st_lpc_wdt.c
>> create mode 100644 include/dt-bindings/mfd/st-lpc.h
>>
>



\
 
 \ /
  Last update: 2015-04-29 16:01    [W:0.109 / U:1.976 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site