lkml.org 
[lkml]   [2015]   [Apr]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [Xen-devel] [PATCH 1/4] xen/events: Clear cpu_evtchn_mask before resuming
On 04/28/2015 12:28 PM, David Vrabel wrote:
> On 28/04/15 16:52, Boris Ostrovsky wrote:
>> When a guest is resumed, the hypervisor may change event channel
>> assignments. If this happens and the guest uses 2-level events it
>> is possible for the interrupt to be claimed by wrong VCPU since
>> cpu_evtchn_mask bits may be stale. This can happen even though
>> evtchn_2l_bind_to_cpu() attempts to clear old bits: irq_info that
>> is passed in is not necessarily the original one (from pre-migration
>> times) but instead is freshly allocated during resume and so any
>> information about which CPU the channel was bound to is lost.
>>
>> Thus we should clear the mask during resume.
>>
>> We also need to make sure that bits for xenstore and console channels
>> are set when these two subsystems are resumed. While rebind_evtchn_irq()
>> (which is invoked for both of them on a resume) calls irq_set_affinity(),
>> the latter will in fact postpone setting affinity until handling the
>> interrupt. But because cpu_evtchn_mask will have bits for these two cleared
>> we won't be able to take the interrupt.
>>
>> Setting IRQ_MOVE_PCNTXT flag for the two irqs avoids this problem by
>> allowing to set affinity immediately, which is safe for event-channel-based
>> interrupts.
> [...]
>> --- a/drivers/tty/hvc/hvc_xen.c
>> +++ b/drivers/tty/hvc/hvc_xen.c
>> @@ -533,6 +533,7 @@ static int __init xen_hvc_init(void)
>>
>> info = vtermno_to_xencons(HVC_COOKIE);
>> info->irq = bind_evtchn_to_irq(info->evtchn);
>> + irq_set_status_flags(info->irq, IRQ_MOVE_PCNTXT);
>> }
>> if (info->irq < 0)
>> info->irq = 0; /* NO_IRQ */
>> diff --git a/drivers/xen/events/events_2l.c b/drivers/xen/events/events_2l.c
>> index 5db43fc..7dd4631 100644
>> --- a/drivers/xen/events/events_2l.c
>> +++ b/drivers/xen/events/events_2l.c
>> @@ -345,6 +345,15 @@ irqreturn_t xen_debug_interrupt(int irq, void *dev_id)
>> return IRQ_HANDLED;
>> }
>>
>> +static void evtchn_2l_resume(void)
>> +{
>> + int i;
>> +
>> + for_each_online_cpu(i)
>> + memset(per_cpu(cpu_evtchn_mask, i), 0, sizeof(xen_ulong_t) *
>> + EVTCHN_2L_NR_CHANNELS/BITS_PER_EVTCHN_WORD);
>> +}
>> +
>> static const struct evtchn_ops evtchn_ops_2l = {
>> .max_channels = evtchn_2l_max_channels,
>> .nr_channels = evtchn_2l_max_channels,
>> @@ -356,6 +365,7 @@ static const struct evtchn_ops evtchn_ops_2l = {
>> .mask = evtchn_2l_mask,
>> .unmask = evtchn_2l_unmask,
>> .handle_events = evtchn_2l_handle_events,
>> + .resume = evtchn_2l_resume,
>> };
>>
>> void __init xen_evtchn_2l_init(void)
>> diff --git a/drivers/xen/xenbus/xenbus_comms.c b/drivers/xen/xenbus/xenbus_comms.c
>> index fdb0f33..30203d1 100644
>> --- a/drivers/xen/xenbus/xenbus_comms.c
>> +++ b/drivers/xen/xenbus/xenbus_comms.c
>> @@ -231,6 +231,7 @@ int xb_init_comms(void)
>> }
>>
>> xenbus_irq = err;
>> + irq_set_status_flags(xenbus_irq, IRQ_MOVE_PCNTXT);
> IRQ_MOVE_PCNTXT means "Interrupt can be migrated from process context"
> which doesn't really sound relevant to me here?
>
> Thomas Glexnier is really not happy with mis-use of IRQ APIs.

Yes, this is somewhat expanding definition of IRQ_MOVE_PCNTXT but then
there are other devices that do the same (HPET, for one).

>
> From the commit log the evtchn_2l_resume() fucntion that's added sounds
> like it fixes the problem on its own?

It in fact makes this problem worse since now that cpu_evtchn_mask is
cleared during resume we cannot process the interrupt anymore in
evtchn_2l_handle_events(): irqs have to be bound to a cpu in order for
an interrupt to be processed.

We already have this issue even without clearing the mask if, say,
xenstore channel changes or if it gets bound to cpu other than 0 before
suspend. It's just that we rarely (if ever) see this happen.

We can explicitly call events_base.c:set_affinity_irq() from
rebind_evtchn_irq() after irq_set_affinity() if we want to avoid using
IRQ_MOVE_PCNTXT flag but that will also looks kind of strange.


-boris



\
 
 \ /
  Last update: 2015-04-28 21:01    [W:0.121 / U:1.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site